Automatic door opener diamond control board

Eagle E555 Universal, for the following models of gate operators: Eagle-1000, Eagle-2000, Eagle-100, Eagle-200

Please make sure your gate operator was manufactured before January 2016

ERD adjustable opening and closing direction travel

Special Note This installation requires professional personnel to operate

Eagle gate Operators use the state of the art Eagle Diamond Control Board. This board includes many new features that cannot be found on other Automatic Gate Openers. The Feature Selector uses an eight station switch that allows selection of the standard features and customized installation settings. The switch description is as follows: Switch 1 = Slave/Master - Sets the operator to work as a Master or a Slave. Switch 2 = Gate Opening - Designates left or right opening. Switch 3 = Motor Brake - If the "on" position is selected, the gate will stop instantly when on the limit switches. This is useful on uphill/downhill applications and on all Fail-Safe operators. Switch 4 = Reverse Loop - Sets the reverse loop to be "normally" open or to "normally" close. It is useful in Fail-safe applications. Switch 5 = One Pass (on/off) - This tailgating feature works with the safety loop to allow only one car to pass. After the car passes, the gate closes instantly. If a second car approaches the gate stops. The operator resumes closing after the car leaves. Switch 6 = Stop-Reverse - This radio feature allows the transmitter to work as a three button station and is useful for a partial opening. If selected, the first command will open the gate, the second will stop the gate, and the third will close the gate. Switch 7 = Alarm Reset (on/off) - If the "on" position is selected (after five minutes "shut down" time period) the operator will reset and any input will be accepted. Normally, the power must be turned off to reset. Switch 8 = Close Timer (on/off) - Sets the timer to close on the "on" or "off" position. The Eagle Automatic Gate Openers Diamond Control Board uses an unique Master/Slave system that requires only two wires. In addition, the Diamond board has global inputs. This board is used with Eagle Models:Eagle-1000, Eagle-2000, Eagle-100, Eagle-200