


4-Core OFC Construction
4-strand core enhances the low-frequency energy sensation, delivers powerful bass & warm vocals; optimizing high-frequency transmission and extension

Further Protect
Features a tin-plated copper braided shielding to effectively block EMI/RFI, with added ferrite beads to further enhance shielding performance

Reliable Connection
Gold's superior electrical conductivity and oxidation resistance ensure audio signal with minimal loss, and durability enhances the service life.

OD 7mm
The nylon jacket -abrasion resistant, provide an outer layer of protection
This is a pair of RCA male-to-XLR female audio cables with separate left and right channels for hifi stereo sound.
They connect hifi devices (CD players, receivers) with RCA outputs to audio gear (monitors, mixers) with XLR inputs, featuring 99.99% OFC core, gold-plated plug, and braided shielding to deliver clean audio with minimal interference
What are the key advantages of these RCA male-to-XLR female cables that use 4-strand OFC conductors?
1) reduced skin-effect loss for extended treble detail, 2) lower resistance for punchy dynamic, 3) flexibility for easy installation, and 4) reduced inherent EMI via star-quad twisting. Together, they ensure clean signal audio with wide dynamic range
Do these RCA male to XLR female audio cables reduce noise?
Audio noise usually comes from three main sources: your device’s own electronic noise, physical damage, or outside interference. This RCA to XLR audio cable features ferrite bead and tinned copper shield to tackle these interference issues.
How do I know if my device is compatible with this cable?
To verify your source has RCA jacks (red/white) on CD/DVD players, turntables, receivers, or amplifiers; and your destination has XLR male ports (three-pin) on powered monitors, audio interfaces, and mixers
How can I choose the right length?
Take a non-elastic cord (or a soft tape measure), simulate the optimal path you want the cable to take. Then, measure the distance and add extra for routing—this will give you the approximate total length required.

You Might Also Like:
TODN - Your Companion in Discovering HiFi Sound



4-Core OFC Construction
4-strand core enhances the low-frequency energy sensation, delivers powerful bass & warm vocals; optimizing high-frequency transmission and extension

Further Protect
Features a tin-plated copper braided shielding to effectively block EMI/RFI, with added ferrite beads to further enhance shielding performance

Reliable Connection
Gold's superior electrical conductivity and oxidation resistance ensure audio signal with minimal loss, and durability enhances the service life.

OD 7mm
The nylon jacket -abrasion resistant, provide an outer layer of protection
This is a pair of RCA male-to-XLR female audio cables with separate left and right channels for hifi stereo sound.
They connect hifi devices (CD players, receivers) with RCA outputs to audio gear (monitors, mixers) with XLR inputs, featuring 99.99% OFC core, gold-plated plug, and braided shielding to deliver clean audio with minimal interference
What are the key advantages of these RCA male-to-XLR female cables that use 4-strand OFC conductors?
1) reduced skin-effect loss for extended treble detail, 2) lower resistance for punchy dynamic, 3) flexibility for easy installation, and 4) reduced inherent EMI via star-quad twisting. Together, they ensure clean signal audio with wide dynamic range
Do these RCA male to XLR female audio cables reduce noise?
Audio noise usually comes from three main sources: your device’s own electronic noise, physical damage, or outside interference. This RCA to XLR audio cable features ferrite bead and tinned copper shield to tackle these interference issues.
How do I know if my device is compatible with this cable?
To verify your source has RCA jacks (red/white) on CD/DVD players, turntables, receivers, or amplifiers; and your destination has XLR male ports (three-pin) on powered monitors, audio interfaces, and mixers
How can I choose the right length?
Take a non-elastic cord (or a soft tape measure), simulate the optimal path you want the cable to take. Then, measure the distance and add extra for routing—this will give you the approximate total length required.

You Might Also Like:
![]() RCA Audio Cable PRO | ![]() Digital Coaxial Cable PRO | ![]() RCA to 3.5mm PRO | ![]() USB 3.0 A to B Cable PRO | ![]() USB B to C Cable PRO | ![]() Speaker Cable PRO | ![]() AUX Cord MAX |
|---|---|---|---|---|---|---|
| Customer Reviews | ||||||
| — | — | — | — | — | — | — |
| Price | ||||||
| — | — | — | — | — | — | — |
| Conductor | ||||||
| 4-core OFC | 4-core OFC | 4-core OFC | 4-core OFC | 4-core OFC | 4-core OFC | 16-core Silver-plated OFC |
| Shielding Layer | ||||||
| Ferrite Bead +Copper Shielding | Ferrite Bead +Copper Shielding | Ferrite Bead +Copper Shielding | Tinned Copper Shielding | Tinned Copper Shielding | / | / |
| Connector | ||||||
| 24K Gold-plated | 24K Gold-plated | 24K Gold-plated | 24K Gold-plated | 24K Gold-plated | 24K Gold-plated | 24K Gold-plated |
| Outer Jacket | ||||||
| Nylon Braided | Nylon Braided | Nylon Braided | Cotton Braided | Cotton Braided | Nylon Braided | PVC |
| OD | ||||||
| 7mm | 7mm | 7mm | 6.5mm | 6.5mm | 9.5mm | 4mm |
TODN - Your Companion in Discovering HiFi Sound






































































