Meet Your Seller
AJMRTC VL53L0X Time-of-Flight ToF Distance Sensor Breakout Board, 940nm Laser Ranging Module I2C Interface for Arduino Raspberry Pi Obstacle Avoidance, Proximity Detection
- 1. VL53L0X FlightSense ToF laser ranging chip, measure absolute distance up to 2000mm, independent of target reflectivity
- 2. 940nm invisible VCSEL laser, Class 1 eye-safe laser design for reliable indoor ranging
- 3. Standard I2C communication bus with programmable address, support XSHUT reset and GPIO1 interrupt pin
- 4. Onboard voltage regulator, accepts 2.6V-5.5V input, compatible with 3.3V and 5V MCU systems
- 5. Compact breakout with pre-soldered header, simple wiring for robot obstacle avoidance and smart sensing projects
Any questions? Ask CelesteSM will help you find out quickly.
AJMRTC VL53L0X Time-of-Flight ranging breakout board is a high-precision laser distance sensor adopting ST FlightSense technology. Different from ordinary infrared reflective sensors, it calculates distance by measuring the flight time of laser photons, so readings are not easily affected by target color, surface brightness or ambient light changes. The built-in 940nm VCSEL infrared laser is Class 1 eye-safe and works stably for long-term continuous detection. It features an I2C fast mode interface up to 400kHz, and you can modify the I2C address via the XSHUT pin to cascade multiple sensors on the same I2C bus. The GPIO1 interrupt pin can trigger a signal once the measured distance exceeds your preset threshold to reduce MCU polling load. The onboard LDO regulator allows wide input voltage, which can be directly powered by 3.3V or 5V systems of Arduino, ESP32, Raspberry Pi and STM32. This sensor is widely used for robot obstacle avoidance, automatic door proximity trigger, intelligent trash can, height detection, parking assist, drone altitude holding and electronic maker experiments. Pre-soldered pin headers support quick plug-in on breadboards for fast prototype testing.
Specifications
Brand: AJMRTC
Chip Model: VL53L0X
Sensing Principle: Time-of-Flight (ToF) Laser Ranging
Laser Wavelength: 940nm VCSEL
Laser Safety Grade: Class 1, Eye Safe
Measuring Range: 30mm ~ 2000mm
Field of View: 25°
Communication Interface: I2C (IIC), up to 400kHz
I2C Default Address: 0x52, Programmable
Control Pins: XSHUT (Reset), GPIO1 (Interrupt Output)
Working Voltage: 2.6V ~ 5.5V
Logic Level: 3.3V, 5V Compatible
Typical Working Current: About 20mA
Operating Temperature: -20 ~ +70
Application: Robot Obstacle Avoidance, Proximity Sensing, Height Measurement, Smart Device, Arduino DIY Project
Package: 1 Pcs Breakout Module
Feature: High Precision, Anti-Interference, Breadboard Friendly
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by ConnectFlow USA Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory









