Your Browsing History
Meet Your Seller
P1P, P1S Hotend Complete Kit for Bamboo Lab 3D Printers, 0.4mm Nozzle | Full Assembly 0.4 mm Hardened-Steel Nozzle, Ceramic Heater, Thermistor, Fan and Extruder Heating Block Replacement
- P1P, P1S Hotend Complete Kit The kit contains 0.4 mm nozzle, fan, resistor, and ceramic heater. It is compatible with common 3D printing wires can be directly replaced
- Safety Cooling FanWhen the fan blades are blocked for 1 - 3 seconds, the drive circuit will automatically power off; automatically try to restart after 2 - 6 seconds. After 72 hours of testing, the fan was still undamaged and could continue to work normally
- Rapid Heating The high-efficiency ceramic heater can heat the nozzle to 300 ° C in a short time and is equipped with high-precision thermosensitive elements to achieve stable temperature control
- Highly integratedThe ceramic heater and resistor are packaged in the same metal terminal module, and the terminals are firmly connected to maintain stability under continuous high temperatures or frequent thermal cycles
- Unique Integrated Nozzle The integrated nozzle and the heating block are integrally formed, and are directly connected to the radiator through a precision metal throat. The heat conduction path is shorter and the temperature rises significantly faster than the traditional structure; at the same time, the integrated design greatly reduces the risk of failure when replacing the nozzle
- Compatible Models This hot-end kit is compatible with P1, P1P, and P1S 3D printers. The fan is pre-fixed, so installation can be completed and printing can be resumed immediately without applying cooling silicone grease
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
P1 Series Hotend Kit Replacement for P1P and P1S Upgrade your printer in minutes with this fully assembled hot end. A hardened-steel 0.4 mm nozzle, high-efficiency ceramic heater, precision thermistor, and pre-installed cooling fan are all integrated into a single aluminum blockno thermal paste or extra tools required. The advanced ceramic heater reaches 300 °C rapidly while the high-accuracy thermistor keeps temperatures rock-steady. Safety fan automatically shuts off if jammed and restarts within seconds, passing 72-hour locked-rotor tests without damage. The one-piece nozzle/heat-block design shortens the heat path for faster warm-ups and eliminates common leaks or threading issues when swapping nozzles. Simply plug it into your Bambu Lab P1P or P1S and resume printing immediately.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Artbloont Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...