RESIONE F39 Flexible 3D Printer Resin, 405nm UV-Curing DLP LCD MSLA Resin Rubber Like TPU Like Photopolymer Resin for LCD Printing (F39-1kg)

Tear resistance
Tear Strength: 47.2KN /m. It has better tear strength than other flexible resins, which means that the prints will not be easily torn during use.
High elongation Elongation at Break: 255%. This can fully ensure that the prints are not easily broken during repeated bending and stretching.
Soft like rubberShore Hardness: 60~75A. The prints is very soft at a temperature above 20°C, but the lower the temperature, the harder it will become. It will become very hard and impact resistant at 5°C.
Comply with RoHS and SVHC (REACH) regulationsF39 resin is fully compliant with RoHS 2.0 and SVHC (REACH) regulations, proving that the raw materials do not contain more than 200 chemical hazardous substances contained in the regulations.
As toughening agentMixing F69/F39/F39T resin with tough resin such as K/M58/M68/G217 can make the printed parts tougher, more durable, and not brittle for a long time.