ABOUT US
Founded in 2002, eSUN is one of the global professional 3D printing material & 3D printing supply manufacturers.
In R&D, eSUN has more than ten international and domestic patented technologies, and is the drafting unit of the national standard for PLA 3D printing filaments.
After years of market development, eSUN has more than 50 agents and distributors around the world, and its products are sold to more than 100 countries and regions.
Outstanding Brand Development Award for Brand "eSUN" from .
eSUN 3D Printer Filament
Compatible with most FDM 3D printers.
PLA Series
High Speed Series
Silk PLA Series
ABS+ & PETG Filament
eBOX-Lite & Vaccum Family
Hard Tough Resin
eSUN 3D Printing Filament Electric Vacuum Storage Kit Pro 2, 10 Bags 33 x 38cm
FAQ:The vacuum bag cannot be vacuumed or air leakage occurs after vacuum
A. Check if the bag is not completely sealed
Solutions: Open the zipper of the bag and reseal the zipper with the sealing clip to ensure that the zipper is completely closed.
B. Check if the air valve is not placed on a flat surface when pumping air
Solutions: Re-lay the bag air valve.
C. Check if the suction port of the electric pump is not in full contact with the air valve
Solutions: Ensure that the suction port is placed flat above the air valve at the appropriate pressure.
D.Check if the pressure of the suction port on the air valve is too large
Solutions: Adjust the pressure of the electric pump.
E. Check if the vacuum bag is damaged
Solutions: Replace the vacuum bag.
eSUN 3D Printing Filament Electric Vacuum Storage Kit Pro 2, 10 Bags 33 x 38cm
FAQ:The vacuum bag cannot be vacuumed or air leakage occurs after vacuum
A. Check if the bag is not completely sealed
Solutions: Open the zipper of the bag and reseal the zipper with the sealing clip to ensure that the zipper is completely closed.
B. Check if the air valve is not placed on a flat surface when pumping air
Solutions: Re-lay the bag air valve.
C. Check if the suction port of the electric pump is not in full contact with the air valve
Solutions: Ensure that the suction port is placed flat above the air valve at the appropriate pressure.
D.Check if the pressure of the suction port on the air valve is too large
Solutions: Adjust the pressure of the electric pump.
E. Check if the vacuum bag is damaged
Solutions: Replace the vacuum bag.
ABOUT US
Founded in 2002, eSUN is one of the global professional 3D printing material & 3D printing supply manufacturers.
In R&D, eSUN has more than ten international and domestic patented technologies, and is the drafting unit of the national standard for PLA 3D printing filaments.
After years of market development, eSUN has more than 50 agents and distributors around the world, and its products are sold to more than 100 countries and regions.
Outstanding Brand Development Award for Brand "eSUN" from .
eSUN 3D Printer Filament
Compatible with most FDM 3D printers.
PLA Series
High Speed Series
Silk PLA Series
ABS+ & PETG Filament
eBOX-Lite & Vaccum Family
Hard Tough Resin
