here!
I’m your shopping assistant for PC builds, upgrades, and everything tech.
Got questions? Ask away!
Start a conversation
Meet Your Seller
SUNLU 3D Printer Filament Bundle, PLA Plus Filament, 250g/Spool | 8 Packs, Christmas Gift, Black+White+Grey+Red+Klein Blue+Green+Yellow+Orange, Fit Bambu Labs Printer
- Try 8 colors at once - ideal for printing multi-color models, allowing you to get 8 colors simultaneously, reducing waste and lowering trial-and-error costs.
- Small Spool Diameter- Spool Diameter: 140mm(5.5 inches), Spool Hub Hole Diameter: 53mm(2.08 inches), Spool Width: 36mm(1.4 inches). Please pay attention to the filament spool size! Please check if it is compatible with your 3D printer.
- SUNLU Wound Neatly Filament- SUNLU R&D team has mastered advanced technology and produced Neatly Wound PLA+ Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency.
- SUNLU PLA PLUS 3D Filament Advantages- PLA PLUS filament is 10 times stronger than PLA Filament, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion.
- 1.75mm Diameter- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
- Recommend Settings- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F).
- Strong compatibility- SUNLU 3D Filament is not only applicable to all SUNLU 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc.
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
PLA PLUS filament is 3 times stronger than PLA Filament, the color is brighter. No clog, no bubble, no tangle.
SUNLU PLA Plus filament has good layer adhesion, very easy to use.
Recommend Settings
Nozzle/Extrusion temperature: 210-235;
Bed/Platform temperature of 55-65;
Printing speed: 50-100mm/s;
These settings are for 0.4mm nozzle, it may be different with different diameters nozzle.
3 Steps Checking: Why is the Filament Not Sticking to the build bed?
Temperature Checking - Please check the temperature(bed and nozzle) settings before printing and set it suitable;
Building Bed Checking - Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed;
Speed Checking - Please check if the printing speed of the first layer is too fast.
Notes
Please insert the filament into the side holes after use to avoid tangles;
Please store the 3D printer filament in a sealed bag or box after using it
Print With SUNLU Filament Dryer S1/S2/S4
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Artbloont Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...