Meet Your Seller
Upgraded Thicker SPARKX i7 PEI Build Plate & Cool Plate,301x267mm Double Sided Textured Low-temperature and Smooth PEI Sheet Flexible Removable Spring Steel Platform for Creality SPARKX i7 3D Printer.
- 1.Premium Build: 0.5mm Spring Steel + Upgraded PEI + Imported Film The 0.5mm spring steel core is thicker than most for extra flatness and durability. Green side features an upgraded PEI powder formula that provides stronger adhesion and an ultra fine matte finish much smoother than ordinary PEI spray coatings. Black side uses 100% imported PEI film for a bubble free, perfectly flat, smooth glossy finish.
- 2. Dual Sided for Different Printing Scenarios Green cold plate supports low temp printing: PLA at just 30 50°C, PETG 50 70°C, ABS 70 90°C saving energy and reducing warping. Black PEI film side gives you a smooth glossy bottom: PLA 55 70°C and quality PETG 70°C (do not exceed 70°C). Neither side works with TPU, PC, nylon, or high temp engineering filaments.
- 3. Cold Plate That Delivers: Ultra Smooth, Strong Grip & Energy Savings Prints stick like a magnet even at low temperatures (PLA from 30°C) no glue, no tape, no warping. The surface is incredibly smooth with no orange peel texture, so your first layer looks clean, flat, and professional. Cuts bed heating energy by up to 40% compared to ordinary PEI plates. For complex PETG on the black PEI side, add a brim/raft, use glue stick if needed, and slow first layer speed to 10 15 mm/s. Never exceed 70°C bed temp on that side.
Any questions? Ask CelesteSM will help you find out quickly.
Upgrade Your 3D Printing Experience Dual-Sided Spring Steel Plate Why This Plate? Most build plates force you to choose between low-temp convenience or a glossy bottom finish. Our plate gives you both in one robust spring steel construction designed for different printing scenarios.
Green Cold Plate Side Low-Temp, Strong Grip Upgraded PEI powder formula + special cold-tune coating Prints PLA from just 30°C (PETG 50-70°C, ABS 70-90°C) Ultra-smooth matte finish no orange peel Excellent corner adhesion no warping, no glue Saves up to 40% energy on bed heating
Black Imported PEI Film Side Smooth Glossy Finish 100% imported PEI film with 3M adhesive bubble-free, flat Optimized for PLA (55-70°C) and quality PETG (70°C) Delivers a clean, smooth, glossy bottom surface Removable protective film peel it off before first use
NOT SUPPORT: TPU, PC, nylon, or any high-temperature engineering filaments on either side.
Easy Maintenance & Removal After printing, let the plate cool to room temperature Bend the spring steel plate the model pops right off (no scraping) Clean with mild dish soap + soft cloth only never alcohol, acetone, or strong acids/alkalis Avoid metal tools on the green cold plate side
PETG Tips for the Black PEI Side For complex or large PETG parts, add a brim or raft, apply a thin glue stick layer if needed, and reduce first layer speed to 10-15 mm/s. Never exceed 70°C bed temperature on this side.
Critical Prevent Nozzle Damage A nozzle that is too low (due to incorrect bed leveling or Z-offset) will gouge the surface of both sides. The nozzle must be exactly one A4 paper thickness away from the plate. A nozzle at 190-220°C touching the plate causes irreversible heat damage this is user error and not covered as a product defect.
Warranty & Support 30-day free returns. Contact us within 24 hours for any questions or issues.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by YOUCAILI Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory















