RESIONE TH72 Flexible Tough 3D Printer Resin, High Impact Resistance, Long-Lasting Toughness, Low Water Absorption, Crack-Resistant Hollow Prints, Ideal for Durable Figurines, Medium Grey 1KG

The prints are not easily damaged: TH72 tough resin for 3d printing can withstand accidental drops, and you can significantly bend or even fold prints with a wall thickness of less than 3mm. It is ideal for printing durable figures
Long-lasting toughness: TH72 flexible resin prints will not slowly become brittle over time. After testing, 1 month of summer sun and rain and 8 hours of high temperature drying at 50-60 will not make it lose its toughness and strength, it has good weather resistance
Hollowed out prints will not crack: The hollowed out model often crack slowly because the interior cannot be completely cleaned and cannot be post-cured. TH72 tough resin will not, allowing you to save more material
Very low water absorption: With a water absorption rate (48hr) of 0.6 %, TH72 3d print resin performs exceptionally well among 3D printer resins. This ensures that prints do not soften due to increased air humidity or crack from long-term moisture absorption. The prints can be used in short-term underwater operations and outdoor scenarios
As a toughening agent for other resins: Tests have shown that adding TH72 printer resin to rigid/standard resins significantly increases their toughness when TH72 uv resin constitutes 40% of the mixed resin, while maintaining sufficient strength
WIDE APPLICATIONS: RESIONE TH72 resin is ideal for tabletop miniatures, figurine statues, props, prototypes, and end-use parts with moderate strength requirementsespecially detailed and fragile areas such as hair, capes, and swordsand can also be used as a toughening agent for ordinary resins and parts exposed to high humidity or short-term underwater environments.