Your Browsing History
- Free 30-day Returns
$58.48
Meet Your Seller
Polymaker LW-PLA 3D Printing Filament 1.75mm, 0.8kg, White
- PRE-FOAMED PLA FILAMENT: Typical density is 0.9 g/cm3. Its lightweight structure forms before printing, so it does not rely on in-nozzle expansion like active-foaming filaments
- RC AIRCRAFT APPLICATIONS: Print wings, airframes and other parts where weight matters. The matte surface softens layer lines; final part weight also depends on walls, infill and geometry
- TDS STARTING SETTINGS: With a 0.4mm nozzle, use 190-210°C nozzle, 25-60°C bed and 50-100mm/s speed. Turn the part-cooling fan on; an enclosed chamber is not required
- TUNE FOR YOUR PRINTER: Test a small part first. If you see stringing or poor first-layer adhesion, adjust temperature, retraction and bed setup. TDS retraction guidance: 3-6mm at 40-60mm/s.
- POLYMAKER LW-PLA 0.8KG SPOOL: Net filament weight is 0.8kg. Store dry; if moisture affects printing, the TDS recommends drying at 55°C for 6 hours. Check spool clearance in multi-material feeders
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
PRE-FOAMED PLA FILAMENT: Typical density is 0.9 g/cm3. Its lightweight structure forms before printing, so it does not rely on in-nozzle expansion like active-foaming filaments
RC AIRCRAFT APPLICATIONS: Print wings, airframes and other parts where weight matters. The matte surface softens layer lines; final part weight also depends on walls, infill and geometry
TDS STARTING SETTINGS: With a 0.4 mm nozzle, use 190-210°C nozzle, 25-60°C bed and 50-100mm/s speed. Turn the part-cooling fan on; an enclosed chamber is not required
TUNE FOR YOUR PRINTER: Test a small part first. If you see stringing or poor first-layer adhesion, adjust temperature, retraction and bed setup.
TDS retraction guidance: 3-6mm at 40-60mm/s.
POLYMAKER LW-PLA 0.8KG SPOOL: Net filament weight is 0.8 kg. Store dry; if moisture affects printing, the TDS recommends drying at 55°C for 6 hours. Check spool clearance in multi-material feeders
RC AIRCRAFT APPLICATIONS: Print wings, airframes and other parts where weight matters. The matte surface softens layer lines; final part weight also depends on walls, infill and geometry
TDS STARTING SETTINGS: With a 0.4 mm nozzle, use 190-210°C nozzle, 25-60°C bed and 50-100mm/s speed. Turn the part-cooling fan on; an enclosed chamber is not required
TUNE FOR YOUR PRINTER: Test a small part first. If you see stringing or poor first-layer adhesion, adjust temperature, retraction and bed setup.
TDS retraction guidance: 3-6mm at 40-60mm/s.
POLYMAKER LW-PLA 0.8KG SPOOL: Net filament weight is 0.8 kg. Store dry; if moisture affects printing, the TDS recommends drying at 55°C for 6 hours. Check spool clearance in multi-material feeders
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ALLOKHE Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...