SUNLU S1 Plus Filament Dryer, White

Say Goodbye to Poor 3D Printing by
Wet Filament: Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments
Personalized Temperature Setting: The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35-55C. Suitable for more than 20 kinds of 3d printing filament commonly used in the market
Personalized Drying Time Setting: The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 1-99 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect
User-friendly Design: The design of two rollers inside the box allows you to print while drying. 2 inch large screen LCD monitor, can display temperature and time clearly and brightly. Ultra quiet design, less than 10db while operating, no disturbing of your life and work
Importance of Filament Dryer: Any material of filaments will absorb moisture from the air, filament being old or in high humidity place may absorb a lot. Damp filament will cause many printing issues, filament dryer can remove moisture from the damp filament
Maximum Capacity and Compatibility: Accommodates filament spools with diameter 1.75 mm, 2.85 mm, and 3mm, with maximum spool dimensions of 21085 (H) mm, making it compatible with most standard filament spools available in the market