3016452 Refrigerator Damper Air Damper Control for Frigidaire FFSS2614QE3A FFSS2614QE4A FFSS2614QE5A FFSS2614QE6A FFSS2614QP0 FFSS2614QP1A FFSS2614QP2A FFSS2614QP3A FFSS2614QP4A [by]

Replacement Part Numbers: 242303001, AP5788340, PS8746718, EAP8746718,
3016452. Please double check your original part number to see if it matches ours before ordering.
Fix Issues:
1.
Refrigerator too cold: When the damper control assembly fails, it will cause the refrigerator section to get too cold and freeze if the damper gets stuck in the open position.
2.
Not cooling enough: If the air door is stuck in the closed position, it will cause the refrigerator to partially warm up and not cold enough.
3.
Error code: H1 Air Damper Control Assembly 120 VAC 50/60 Hz 17 mA, for: Frigidaire FFHS2311LBB, FFHS2311LBC, FFHS2311LBD, FFHS2311LBE, FFHS2311LBFA, FFHS2311LWB, FFHS2311LWC; for Crosley CRSH232PB3, CRSH232PB5, CRSH232PB6, CRSH232PB7A, CRSH232PB8A, CRSH232PB9A, CRSH232PBBA; for White WWSS2614SS1, FFSS2615TS2, FFSS2615TS1, FFSS2615TD2.
Easy Installation: Replace
the damper control assembly:
1. Disconnect the power supply first, put on gloves to protect your hands.
2. Remove the top shelf, remove the 5 mounting screws, disconnect the yellow wire and remove the thermostatic sensor.
3. Remove the damper, unplug the power supply, remove the ground wire, remove the foam shutter and remove any adhesive left behind.
4. Install the new air damper control assembly