
Note
- High quality cat6/7/8 cable is needed, please make sure the cables follows IEEE-568B standard
- Only supports the PCM audio output
- Do not mix up TX and RX side before installation.
Package
- 1 * LKV372Pro HDMI Extender TX Sender
- 1 * LKV372Pro HDMI Extender RX Receiver
- 1 * IR Blaster Cable
- 1 * IR Receiver Cable
- 1 * User Manual
- 2 * Power Adapters

Specifications

HDMI Loop-out
Additional HDMI output on the Transmitter to connect to a local display for monitoring or cascade HDMI signals

IR Remote Control
Allow source device to recognize remote commands; You can control the HDMI source device at a secondary location with the included IR cables that forward commands over a CAT6 cable for convenience

Simple Installation
Hanging wall design, convenient and easy to install
Accessories for this HDMI Extender
If you need additional CAT7 cable or IR cables, get them here!
![]() 50ft CAT7 Cable | ![]() IR cables | |
|---|---|---|
| Customer Reviews | — | — |


Note
- High quality cat6/7/8 cable is needed, please make sure the cables follows IEEE-568B standard
- Only supports the PCM audio output
- Do not mix up TX and RX side before installation.
Package
- 1 * LKV372Pro HDMI Extender TX Sender
- 1 * LKV372Pro HDMI Extender RX Receiver
- 1 * IR Blaster Cable
- 1 * IR Receiver Cable
- 1 * User Manual
- 2 * Power Adapters

Specifications
| HDMI signal | HDMI V1.3 |
| Support resolution | 480i@60Hz; 480p@60Hz; 576i@50Hz; 576p@50Hz; 720p@50/60Hz; 1080i@50/60Hz; 1080p@50/60Hz |
| Network cable | low resistance and consumption oxygen-free copper core (CAT6?CAT6A?CAT7?CAT8) |
| Transmission length | Max 60m at 1080p |
| Audio output | PCM format only |
| IR remote control | Support 20~60KHz wide frequency IR remote control |
| Working temperature | 0?~60? |
| Power supply | DC5V/1A |
| Power consumption | TX<3W; RX<2W |

HDMI Loop-out
Additional HDMI output on the Transmitter to connect to a local display for monitoring or cascade HDMI signals

IR Remote Control
Allow source device to recognize remote commands; You can control the HDMI source device at a secondary location with the included IR cables that forward commands over a CAT6 cable for convenience

Simple Installation
Hanging wall design, convenient and easy to install
Accessories for this HDMI Extender
If you need additional CAT7 cable or IR cables, get them here!
![]() 50ft CAT7 Cable | ![]() IR cables | |
|---|---|---|
| Customer Reviews | — | — |






















