What is PLA+ Material?
• PLA+ is improved and upgraded based on ordinary PLA (Polylactic Acid). It has higher strength and toughness, one of the most commonly used 3D printer materials, is an excellent choice for a wide range of printing applications.
Available Color Combinations:
•Fire Engine Red + Grey + Cold White + Black, Fire Engine Red x 4, Cold White x 4, Grey x 4, Black x 4, Pine Green x 4, Fire Engine Red + Blue + Cold White + Black, Black 10 pack, Cold White 10 pack, Classic 10 colors pack
Recommended Printing Parameters:
• Printing Temperature: 210-230? (Recommended Temperature 215?)
• Bed Temperatured: 45-60°C,
• Printing Speed: 40-100mm/s
• Fan Speed: 100%
• Recommended Heated Build Platform: Textured Paper, PVP Solid Glue, PEI
Vacuumed Sealed Packaging:
Antioxidants + Vacuum Packaging
eSUN filament comes in a sealed vacuum bag with desiccant bag, easily keep your 3D printer filament at an optimal storage condition and free from dust or dirt.
How to Storage:
1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
2. In order to extend the life of your filament, please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place after print.
3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time.
Please Notice:
The picture shown is a representation of the item, color may vary slightly due to the color setting of each individual monitor. Please double check the size and color before purchasing.
Comparison of eSUN PLA Series Filament
PLA Plus |
Upgraded Matte PLA |
Upgraded PLA |
PETG |
Silk PLA |
Silk Magic PLA |
Lightweight PLA |
|
|---|---|---|---|---|---|---|---|
|
Customer Reviews
|
— | — |
—
|
— | — | — | — |
|
Price
|
— | — | — | — | — | — | — |
|
Density(g/cm3)
|
1.23 | 1.329 | 1.23 | 1.27 | 1.21 | 1.256 | 1.2 |
|
Heat Distortion Temp(0.45MPa)
|
53 | 51 | 53 | 64 | 50 | 54.7 | 53 |
|
Melt Flow Index(g/10min)
|
5(190?/2.16kg) | 5.8(190?/2.16kg) | 5.7(190?/2.16kg) | 20(250?/2.16kg) | 4.8(190?/2.16kg) | 11.32(190?/2.16kg) | 8.1(190?/2.16kg) |
|
Tensile Strength(MPa)
|
60 | 42 | 61.34 | 52.2 | 52 | 57.64 | 32.2 |
|
Elongation at Break(%)
|
20 | 50 | 29.92 | 83 | 14.4 | 21.76 | 68.9 |
|
Flexural Strength(MPa)
|
74 | 59.95 | 100.27 | 58.1 | 65 | 78.7 | 41.31 |
|
Flexural Modulus(MPa)
|
1973 | 2878.5 | 3824 | 1073 | 1447 | 2800.36 | 1701 |
|
IZOD Impact Strength(kJ/?)
|
6 | 6.2 | 6.3 | 4.7 | 5.86 | 6.45 | 8.58 |
|
Printing Temperature
|
210 - 230? | 190 - 230? | 190-230? | 230 - 250? | 190 - 230? | 190 - 230? | 190 - 270? |
|
Bed Temperature
|
45 - 60°C | 45 - 60°C | 45 - 60°C | 75-90°C | 45 - 60°C | 45 - 60°C | 45 - 60°C |
|
Fan Speed
|
100% | 100% | 100% | 100% | 100% | 100% | 100% |
|
Printing Speed
|
40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s |
eSUN PLA+ Filament 1.75mm, PLA Plus 3D Printer Filament, Filament Bundle
What is PLA+ Material?
• PLA+ is improved and upgraded based on ordinary PLA (Polylactic Acid). It has higher strength and toughness, one of the most commonly used 3D printer materials, is an excellent choice for a wide range of printing applications.
Available Color Combinations:
•Fire Engine Red + Grey + Cold White + Black, Fire Engine Red x 4, Cold White x 4, Grey x 4, Black x 4, Pine Green x 4, Fire Engine Red + Blue + Cold White + Black, Black 10 pack, Cold White 10 pack, Classic 10 colors pack
Recommended Printing Parameters:
• Printing Temperature: 210-230? (Recommended Temperature 215?)
• Bed Temperatured: 45-60°C,
• Printing Speed: 40-100mm/s
• Fan Speed: 100%
• Recommended Heated Build Platform: Textured Paper, PVP Solid Glue, PEI
Vacuumed Sealed Packaging:
Antioxidants + Vacuum Packaging
eSUN filament comes in a sealed vacuum bag with desiccant bag, easily keep your 3D printer filament at an optimal storage condition and free from dust or dirt.
How to Storage:
1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
2. In order to extend the life of your filament, please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place after print.
3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time.
Please Notice:
The picture shown is a representation of the item, color may vary slightly due to the color setting of each individual monitor. Please double check the size and color before purchasing.
Comparison of eSUN PLA Series Filament
|
PLA Plus |
Upgraded Matte PLA |
Upgraded PLA |
PETG |
Silk PLA |
Silk Magic PLA |
Lightweight PLA |
|---|---|---|---|---|---|---|
| Customer Reviews | ||||||
| — | — |
—
|
— | — | — | — |
| Price | ||||||
| — | — | — | — | — | — | — |
| Density(g/cm3) | ||||||
| 1.23 | 1.329 | 1.23 | 1.27 | 1.21 | 1.256 | 1.2 |
| Heat Distortion Temp(0.45MPa) | ||||||
| 53 | 51 | 53 | 64 | 50 | 54.7 | 53 |
| Melt Flow Index(g/10min) | ||||||
| 5(190?/2.16kg) | 5.8(190?/2.16kg) | 5.7(190?/2.16kg) | 20(250?/2.16kg) | 4.8(190?/2.16kg) | 11.32(190?/2.16kg) | 8.1(190?/2.16kg) |
| Tensile Strength(MPa) | ||||||
| 60 | 42 | 61.34 | 52.2 | 52 | 57.64 | 32.2 |
| Elongation at Break(%) | ||||||
| 20 | 50 | 29.92 | 83 | 14.4 | 21.76 | 68.9 |
| Flexural Strength(MPa) | ||||||
| 74 | 59.95 | 100.27 | 58.1 | 65 | 78.7 | 41.31 |
| Flexural Modulus(MPa) | ||||||
| 1973 | 2878.5 | 3824 | 1073 | 1447 | 2800.36 | 1701 |
| IZOD Impact Strength(kJ/?) | ||||||
| 6 | 6.2 | 6.3 | 4.7 | 5.86 | 6.45 | 8.58 |
| Printing Temperature | ||||||
| 210 - 230? | 190 - 230? | 190-230? | 230 - 250? | 190 - 230? | 190 - 230? | 190 - 270? |
| Bed Temperature | ||||||
| 45 - 60°C | 45 - 60°C | 45 - 60°C | 75-90°C | 45 - 60°C | 45 - 60°C | 45 - 60°C |
| Fan Speed | ||||||
| 100% | 100% | 100% | 100% | 100% | 100% | 100% |
| Printing Speed | ||||||
| 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s | 40 - 100mm/s |