What is ABS Plus Material?
· ABS Plus is improved and upgraded based on ABS, cracking and warping has been significantly improved when printing large-size items. It has high strength, better toughness, excellent impact strength, wear resistance, heat resistance and creep resistance.
· Strong and durable ABS+ filament is engineering thermoplastic, widely used in printing parts with higher requirements for resistance to heat, such as industrial machinery parts, model machinery, electronic appliances and instrumentation.
Specification of ABS Plus:
Diameter: 1.75mm
Weight: 1KG
5 Available Colors: Cold White, Black, Grey, Light Blue, Fire Engine Red
Printing Temperature: 230-270? (Recommended Temperature 240?)
Recommended Heated Build Platform: High Temperature Tape, PVP Solid Glue
Vacuumed Sealed Packaging:
Antioxidants + Vacuum Packaging + Product Manual
eSUN filament comes in a sealed vacuum bag with desiccant bag, easily keep your 3D printer filament at an optimal storage condition and free from dust or dirt.
How to Storage:
1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
2. In order to extend the life of your filament, please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place after print.
3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time.
Please Notice:
1. The picture shown is a representation of the item, color may vary slightly due to the color setting of each individual monitor. Please double check the size and color before purchasing.
2. Warning:This Filament (when used in the operation of 3D Printers or 3D Pens ) can expose you and others in the same room to styrene, a chemical known to the State of California to cause cancer. www.P65Warnings.ca.gov.
eSUN ABS+ Filament 1.75mm, 3D Printer Filament ABS Plus, 1KG Spool (2.2 LBS)
What is ABS Plus Material?
· ABS Plus is improved and upgraded based on ABS, cracking and warping has been significantly improved when printing large-size items. It has high strength, better toughness, excellent impact strength, wear resistance, heat resistance and creep resistance.
· Strong and durable ABS+ filament is engineering thermoplastic, widely used in printing parts with higher requirements for resistance to heat, such as industrial machinery parts, model machinery, electronic appliances and instrumentation.
Specification of ABS Plus:
Diameter: 1.75mm
Weight: 1KG
5 Available Colors: Cold White, Black, Grey, Light Blue, Fire Engine Red
Printing Temperature: 230-270? (Recommended Temperature 240?)
Recommended Heated Build Platform: High Temperature Tape, PVP Solid Glue
Vacuumed Sealed Packaging:
Antioxidants + Vacuum Packaging + Product Manual
eSUN filament comes in a sealed vacuum bag with desiccant bag, easily keep your 3D printer filament at an optimal storage condition and free from dust or dirt.
How to Storage:
1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
2. In order to extend the life of your filament, please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place after print.
3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time.
Please Notice:
1. The picture shown is a representation of the item, color may vary slightly due to the color setting of each individual monitor. Please double check the size and color before purchasing.
2. Warning:This Filament (when used in the operation of 3D Printers or 3D Pens ) can expose you and others in the same room to styrene, a chemical known to the State of California to cause cancer. www.P65Warnings.ca.gov.