Toksen3D Filament Store
Can this PLA Basic really print at 500-600mm/s?
Yes, PLA Basic is formulated for high-speed printing up to 600mm/s with proper cooling and flow rate. For best results, use nozzle 220-230°C, bed 50-60°C. Start at 300mm/s. High speed can reduce layer adhesion, so adjust cooling fan to 80-100%
Why does my nozzle keep clogging at high speed?
High-speed printing requires more melt flow. If temp too low, filament can’t melt fast enough. Raise nozzle temp by 10-15°C (try 220-235°C). Also check your flow rate limit; if it’s set below 20-25mm³/s, the extruder may skip. Clean nozzle regularly
The filament snapped on the spool. Is this normal?
PLA can become brittle when exposed to moisture. Dry filament at 50-55°C for 6-8 hours. Spool tangles happen if you let go of filament end – always insert the tip into spool edge holes after unloading. Our filament is machine-wound to avoid tangles
Can I use this PLA Basic with my AMS?
Yes, PLA Basic is fully AMS compatible. Unlike abrasive or very brittle filaments, PLA Basic feeds smoothly through AMS and won't damage the funnel. For best results, keep spool edges clean and store filament in dry environment
Will the color be the same if I buy again next month?
Yes. Toksen3D PLA Basic uses strict batch-to-batch color calibration and ISO-controlled raw materials. Colors remain consistent across production runs. If you need to match an existing print, share batch number and we'll check closest current batch
More High Speed 500mm/s PLA Basic 3D Filament
 PLA Basic Grey |  PLA Basic Christmas Green |  PLA Basic Yellow |  PLA Basic Peanut brown |  PLA Basic Red Brown |  PLA Basic Black |  PLA Basic White | |
|---|---|---|---|---|---|---|---|
Price | — | — | — | — | — | — | — |
Diameter | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm |
Net Weight | 1kg / 2.2 pounds | 1kg / 2.2 pounds | 1kg / 2.2 pounds | 1kg / 2.2 pounds | 1kg / 2.2 pounds | 1kg / 2.2 pounds | 1kg / 2.2 pounds |
Length | 330 ± 20m | 330 ± 20m | 330 ± 20m | 330 ± 20m | 330 ± 20m | 330 ± 20m | 330 ± 20m |
Series | Fast PLA Basic High Speed | Fast PLA Basic High Speed | Fast PLA Basic High Speed | Fast PLA Basic High Speed | Fast PLA Basic High Speed | Fast PLA Basic High Speed | Fast PLA Basic High Speed |
AMS or Not | Can be used on AMS | Can be used on AMS | Can be used on AMS | Can be used on AMS | Can be used on AMS | Can be used on AMS | Can be used on AMS |
Toksen3D is a professional 3D printing consumables manufacturer integrating R&D, production and sales. With 10 years of experience in the field of 3D printing consumables, we have more than 40 materials and more than 100 colors of 3D print filament.
To meet market demand, we have spot inventory to support small batch orders, we also support OEM. At the same time, we provide photography solutions for clients, saving time in sales preparation.
Glow in the Dark
Matte Dual & Tri Color
Gradient Rainbow
Regular Color
Silk Dual & Tri Color
Silk Color
Chameleon Starry
Glitter in PLA filamenr can color change by different light and angle, shiny and tough
Matte Color
Matte Surface Finish, Soomth and Perfect Hide Layer Line
Light Variation
Color Change by UV & Sunlight, Interesting PLA Filaments suitable for outdoor prints
Stable
Quality raw materials and production tech to solve the problem of printer clogging in print farms and most of FDM printer
Test
We have over 20 different printers for testing goods or samples, each of batch goods will be randomly inspected, printed, and tested according to the production speed of the 3D farm
Customizable
Multiple colors, multiple functions better aesthetic display. We can achieve the color display that customers want. Powerful color powder configuration factory provides us with strong support
Toksen3D Filament Store
Can this PLA Basic really print at 500-600mm/s?
Yes, PLA Basic is formulated for high-speed printing up to 600mm/s with proper cooling and flow rate. For best results, use nozzle 220-230°C, bed 50-60°C. Start at 300mm/s. High speed can reduce layer adhesion, so adjust cooling fan to 80-100%
Why does my nozzle keep clogging at high speed?
High-speed printing requires more melt flow. If temp too low, filament can’t melt fast enough. Raise nozzle temp by 10-15°C (try 220-235°C). Also check your flow rate limit; if it’s set below 20-25mm³/s, the extruder may skip. Clean nozzle regularly
The filament snapped on the spool. Is this normal?
PLA can become brittle when exposed to moisture. Dry filament at 50-55°C for 6-8 hours. Spool tangles happen if you let go of filament end – always insert the tip into spool edge holes after unloading. Our filament is machine-wound to avoid tangles
Can I use this PLA Basic with my AMS?
Yes, PLA Basic is fully AMS compatible. Unlike abrasive or very brittle filaments, PLA Basic feeds smoothly through AMS and won't damage the funnel. For best results, keep spool edges clean and store filament in dry environment
Will the color be the same if I buy again next month?
Yes. Toksen3D PLA Basic uses strict batch-to-batch color calibration and ISO-controlled raw materials. Colors remain consistent across production runs. If you need to match an existing print, share batch number and we'll check closest current batch
More High Speed 500mm/s PLA Basic 3D Filament
PLA Basic Grey | PLA Basic Christmas Green |  PLA Basic Yellow | PLA Basic Peanut brown | PLA Basic Red Brown |  PLA Basic Black | PLA Basic White |
|---|---|---|---|---|---|---|
| Price | ||||||
| — | — | — | — | — | — | — |
| Diameter | ||||||
| 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm |
| Net Weight | ||||||
| 1kg / 2.2 pounds | 1kg / 2.2 pounds | 1kg / 2.2 pounds | 1kg / 2.2 pounds | 1kg / 2.2 pounds | 1kg / 2.2 pounds | 1kg / 2.2 pounds |
| Length | ||||||
| 330 ± 20m | 330 ± 20m | 330 ± 20m | 330 ± 20m | 330 ± 20m | 330 ± 20m | 330 ± 20m |
| Series | ||||||
| Fast PLA Basic High Speed | Fast PLA Basic High Speed | Fast PLA Basic High Speed | Fast PLA Basic High Speed | Fast PLA Basic High Speed | Fast PLA Basic High Speed | Fast PLA Basic High Speed |
| AMS or Not | ||||||
| Can be used on AMS | Can be used on AMS | Can be used on AMS | Can be used on AMS | Can be used on AMS | Can be used on AMS | Can be used on AMS |
Toksen3D is a professional 3D printing consumables manufacturer integrating R&D, production and sales. With 10 years of experience in the field of 3D printing consumables, we have more than 40 materials and more than 100 colors of 3D print filament.
To meet market demand, we have spot inventory to support small batch orders, we also support OEM. At the same time, we provide photography solutions for clients, saving time in sales preparation.
Glow in the Dark
Matte Dual & Tri Color
Gradient Rainbow
Regular Color
Silk Dual & Tri Color
Silk Color
Chameleon Starry
Glitter in PLA filamenr can color change by different light and angle, shiny and tough
Matte Color
Matte Surface Finish, Soomth and Perfect Hide Layer Line
Light Variation
Color Change by UV & Sunlight, Interesting PLA Filaments suitable for outdoor prints
Stable
Quality raw materials and production tech to solve the problem of printer clogging in print farms and most of FDM printer
Test
We have over 20 different printers for testing goods or samples, each of batch goods will be randomly inspected, printed, and tested according to the production speed of the 3D farm
Customizable
Multiple colors, multiple functions better aesthetic display. We can achieve the color display that customers want. Powerful color powder configuration factory provides us with strong support
