Unifi Ubiquiti Networks UPS 2U PRO Power Distributor (UPS-2U-PRO)

UniFi-managed 1.92kVA rackmount UPS with pure sine wave output, 8 individually controllable outlets with per-port power monitoring and remote power cycling, a field-replaceable 720Wh battery, and up to 22 minutes of runtime at half load 960W. Supports Graceful Shutdown for UNVR and UNAS, and NUT compatibility for third-party devices.

1. Dimensions: 442.4 x 87.4 x 630 mm (17.4 x 3.4 x 24.8")
2. Weight: 32 kg (70.5 lb)
3. Enclosure Material: Galvanized steel
4. Form Factor: Rack mount (2U)
5. Weatherproofing: IP20

1. Management: Ethernet
2. Networking Interface:
3. (1) 100/10 MbE port for network connection
4. (2) GbE ports for surge in/out
5. Power:
6. (1) OVC II AC in: NEMA 5-20P
7. (8) Battery backup/surge protection: NEMA 5-20R
8. Capacity: 1920VA/1920W
9. Type: Line interactive
10. Input Voltage Range: 89145V AC
11. Power Method: (1) TN system, 120V AC, 16A Max., 50/60 Hz
12. Nominal Input Voltage: 120V AC
13. Output Voltage: 120V AC
14. Nominal Output Voltage: 120V AC
15. Frequency Range:
16. AC mode: 50/60 Hz ±5 Hz (Auto sensing)
17. Battery mode: 60 Hz ±1 Hz
18. AC Voltage Regulation: ±1.5% (Battery mode)
19. Transfer Time: 6 ms typical; 10 ms max. (Battery mode)
20. Wave Form: Pure sine wave (Battery mode)
21. Battery Type: (1) Lead Acid 72V, 10Ah
22. Runtime:
23. Full load: 9 min
24. Half load: 22 min
25. Battery Charging Time: 8 hours recovery to 90% capacity
26. Overload at On-Line Mode:
27. 103120%: 5 min go to fault
28. 120150%: 10 sec go to fault
29. 150%: 1 sec go to fault
30. Overload at Battery Mode:
31. 103120%: 1 min go to fault
32. 120150%: 10 sec go to fault
33. 150%: 0.5 sec go to fault
34. Short Circuit Protection at On-Line Mode: Breaker, 250V AC, 20A
35. Emergency Power Off (EPO):
36. Display: 3.7" touchscreen
37. Buttons: (1) Power, (1) Factory reset, (1) Circuit breaker
38. LEDs:
39. 
    
40. 
    
41. Status:
42. 
    
43. 
    
44. Off: device not turned on
45. 
    
46. 
    
47. Flashing white: initializing / factory default
48. 
    
49. 
    
50. Steady white: waiting for adoption
51. 
    
52. 
    
53. Steady blue: device adoption and working
54. 
    
55. 
    
56. Flashing blue: battery mode
57. 
    
58. 
    
59. Alternating white/blue: firmware upgrading
60. 
    
61. 
    
62. Rapid flashing blue: locate
63. 
    
64. 
    
65. Steady red: warning
66. 
    
67. 
    
68. Flashing red: low battery
69. 
    
70. 
    
71. Ethernet:
72. Operating Altitude: 3,000 m (1.9 mi)
73. Operating Environment: Pollution Degree 2
74. Ambient Storage Temperature: -15 to 50° C (5 to 122° F)
75. Ambient Operating Temperature: 0 to 40° C (32 to 104° F)
76. Ambient Operating Humidity: 0 to 95% noncondensing
77. NDAA Compliant:
78. Certifications: FCC, IC, UL 1778, CSA C22.2 No. 107.3

1. Application Requirements:
2. Mobile Apps: iOS: Version 10.36.1 and later, Android: Version 10.39.3 and later
3. UniFi Network: Version 10.5.67 and later