Mission Control Concrete Oil Stain Remover
Mission Control Concrete Stain Remover cuts and lifts oil and grease from porous concrete. This professional concrete oil stain remover works on the surface and rinses clean. Works as a driveway oil stain remover, garage floor degreaser, and concrete cleaner for patios and workshop slabs. Pour onto the stain, wait a few minutes, agitate with a stiff-bristle brush, and flush with clear water. For heavier spills, apply again as needed. No mixing, no pressure washer required. Built for unsealed concrete. This works best on fresh oil and grease, so treat spills and drips as soon as possible, before they soak in and set. This is not for old, set-in stains. Made in the USA.
When should I treat a stain for the best result?
As soon as possible. This works best on fresh oil and grease before it soaks in and sets. The sooner you treat a spill or drip, the better the result.
Will this work on an old stain that has been there a while?
No. This is built for fresh oil and grease. Stains that have soaked in and set over time will not come out. Treat spills while they are fresh for the best result.
Do I need a pressure washer or any special tools?
No. Just pour onto the stain, wait a few minutes, agitate with a stiff-bristle brush, and flush with clear water. For heavier spills, apply again as needed.
What surfaces does it work on?
Built for porous concrete: driveways, garage floors, patios, and workshop slabs. Test on a small area first. For unsealed concrete or uncoated floors.
How much can one bottle cover?
Coverage depends on the stain's size, depth, and your concrete's porosity. Apply liberally so the stain stays wet while it works. Large or heavy stains use more.
A Product for Every Problem.
Mission Control was built on a simple idea: every household problem deserves its own dedicated formula. Each product targets one specific job and handles it right.
No multi-purpose compromises. No vague promises. Just clear instructions, measured dosing, and a formula built for the job at hand.
The best products are the ones you never have to think twice about. Identify the problem, grab the right bottle, move on with your day.
How did Mission Control get started?
We kept seeing homeowners stuck with all-purpose products that half-solve everything. So we built a lineup where every bottle has one job and clear directions to get it done.
What makes Mission Control different?
Single-purpose formulas, exact dosing on every label, and instructions written like a checklist, not a riddle. You know what it does, how much to use, and what to expect.
Why "Mission Control"?
Because solving a problem at home should feel like a mission: assess, execute, confirm. Our products give you that same control and confidence.
A Product for Every Problem.
Mission Control was built on a simple idea: every household problem deserves its own dedicated formula. Each product targets one specific job and handles it right.
No multi-purpose compromises. No vague promises. Just clear instructions, measured dosing, and a formula built for the job at hand.
The best products are the ones you never have to think twice about. Identify the problem, grab the right bottle, move on with your day.
How did Mission Control get started?
We kept seeing homeowners stuck with all-purpose products that half-solve everything. So we built a lineup where every bottle has one job and clear directions to get it done.
What makes Mission Control different?
Single-purpose formulas, exact dosing on every label, and instructions written like a checklist, not a riddle. You know what it does, how much to use, and what to expect.
Why "Mission Control"?
Because solving a problem at home should feel like a mission: assess, execute, confirm. Our products give you that same control and confidence.
Mission Control Concrete Oil Stain Remover
Mission Control Concrete Stain Remover cuts and lifts oil and grease from porous concrete. This professional concrete oil stain remover works on the surface and rinses clean. Works as a driveway oil stain remover, garage floor degreaser, and concrete cleaner for patios and workshop slabs. Pour onto the stain, wait a few minutes, agitate with a stiff-bristle brush, and flush with clear water. For heavier spills, apply again as needed. No mixing, no pressure washer required. Built for unsealed concrete. This works best on fresh oil and grease, so treat spills and drips as soon as possible, before they soak in and set. This is not for old, set-in stains. Made in the USA.
When should I treat a stain for the best result?
As soon as possible. This works best on fresh oil and grease before it soaks in and sets. The sooner you treat a spill or drip, the better the result.
Will this work on an old stain that has been there a while?
No. This is built for fresh oil and grease. Stains that have soaked in and set over time will not come out. Treat spills while they are fresh for the best result.
Do I need a pressure washer or any special tools?
No. Just pour onto the stain, wait a few minutes, agitate with a stiff-bristle brush, and flush with clear water. For heavier spills, apply again as needed.
What surfaces does it work on?
Built for porous concrete: driveways, garage floors, patios, and workshop slabs. Test on a small area first. For unsealed concrete or uncoated floors.
How much can one bottle cover?
Coverage depends on the stain's size, depth, and your concrete's porosity. Apply liberally so the stain stays wet while it works. Large or heavy stains use more.