20G USB 3.2 Type C Gen2x2 Flat Ribbon Cable Fold 90 Angle USB C 3.2 Extender OTG Data Charge FPC FPV Aerial Photography Cord 20P(T6A-T7B-NC)(15cm)

USB 3.2 Type C Extension Cable USB 3.2 USB-C to USB-C Male to Female Adapter Cable Gen2x2 20Gbps Charging Data Cable Support OTG
Quantity: 1pc
Model Description.
T6A/T6B flat type-C male connector
T7B flat type-C female chassis connector
T8T Angled type-C female chassis connector with 2 positioning holes
T9A Angled type-C male connector
Model number with -NC means no e-mark chip; Model number with +BK means with PCI baffle.
Speed bandwidth: support gen2 speed within 50cm of wire length; support gen1 speed within 3m.
Product ModelUTT3-MF-20P series products
Product Name: USB 3.2 Type C adapter extension cable
Cable length: 15cm, 25cm(support length customization, if you need other length, please contact us to change the price, thank you! )
Adaptation range: USB 3.2 USB-C to USB-C (support OTG)
Speed bandwidth: USB 3.2 standard, Gen2x2 20G. bps ( 0.5 m support Gen2, 3m support Gen1)
Current capacity: 3A (measured within 50cm support 3A, 1 meter support 1.5A )
Product applications: cell phones, tablet PCs, GPS navigators, storage devices, imaging devices, ROCK Pi 4 Raspberry Pi-compatible microcontroller development board, built-in USB device extension adapter purposes, convenient for USB device charging and USB signal extension transmission and other uses.
UTT-20G series product model description
Wire length description.
Cable length refers to the visible part of the cable, not including the PCB and connectors.
Summary of technical questions.
What is the thickness of the wire? Is it soft?
The thickness of the wire is only 1.4 mm, so the wire is a bit softer.
What is the quality of the wire? Is it shielded?
EMI shielded conductive polymer, a new material for EMI shielding, is used in the flat cable design. This technology allows each cable to be completely covered by an EMI shield of conductive polymer to prevent incoming or outgoing emissions of electromagnetic frequencies, minimize interference and performance degradation, and reduce the weight of the spreader.
What is the difference between Model T6A with chip and without chip?
T6A with chip means that the PCB is soldered with RT1710 e-mark chip, which supports high current 3A, up to 5A. Compatibility, expandability and security are relatively good. Support Alternate Mode, Vendor Defined Message (USB PD)
T6A-NC without chip version, only suitable for general use, does not support high current, USB data transfer function can still be used normally.