DP to DP Male to Male Extension Cable Displayport-compatible DP1.2 Adapter Flat Cord for Graphics Card w Gold-plated Connector(P1A-P1B)(25cm)

DP to DP Male to Male Extension Cable Displayport-compatible DP 1.2 Adapter Cable for Graphics Card with Gold-plated Connector
Note: The extension cable does not support two or more DP cables connected in series. If you connect more than two DP cables in series, the signal will be attenuated. It may not be used normally.
Brand: ADT-Link
Product Model: DPP series goods
Product name: standard DP extension adapter cable (large DP interface to large DP interface)
Cable length: 15cm, 25cm (support line length customization, if you need other lengths, please contact us to change the price, thank you! )
Product specifications: support DP 1.2 version, support HDR / DSC signal transmission
Refresh rate: 1080P-240Hz, 2K-144/165Hz, 4K-60Hz
Audio transmission: 32-bit / 1536kHz
Operating temperature: -20 ~ 80
Wire length description.
The cable length is the part of the cable that does not include the PCB as well as the connector.
Product Advantages:
Material advantages: this wire is made of high-quality wire, using high-quality terminals gold-plated connectors, high-frequency support DP 1.2 stable transfer. PCB selection of high-frequency low-resistance quality materials, PCB workmanship precision, PCB using high TG plate, copper thickness thickened to 1oz; connector gold-plated conductive performance, can reduce the oxidation of rust impedance caused by the rise of the black screen blue screen flicker screen problems.
Design advantages: differential signal without over-hole design, there will be no CAF micro-short circuit phenomenon high-speed signal data transmission does not exist parasitic capacitance and parasitic inductance signal attenuation interference problems, power supply circuit to strengthen the wiring design, PCB board miniaturization design, can reduce institutional interference, not card hardware, connectors without locking design, product installation is easy.
Production advantages: production at the metal welding points to strengthen the welding. And set on the heat-shrink tube protection, the product is strong and reliable, there will be no problem of broken wires and dropped wires. Product workmanship is good, stable and reliable durable.
Precautions for use:
When plugging in the line must recognize the direction, do not insert the reverse or insert the offset position, to prevent burning equipment. When plugging in the first hold the device socket and then plug the line, to avoid excessive force will be socket pins broken. Bending and pulling are prohibited within 2cm of the welded ends of the cable and the board.
Summary of technical questions.
What is the quality of the wire? Is it shielded?
The black version of the cable uses only advanced EMI shielding conductive polymers, the silver or blue version of the cable increases the use of metal shielding, new materials for EMI shielding, and flat cable design. This technology allows each cable to be completely covered by a conductive polymer EMI shield to prevent incoming or outg