ADT PCI-E 4.0 x1 x8 Adapter Board Male to Male Female to Female Riser Extender Cable 8X PCIe TX-RX Signal Docking Jump GPU Cord(M88AA 4.0)(30cm)

ADT-Link PCI-E 4.0 x1 x8 Adapter Board Male to Male Female to Female Riser Extender Cable 8X PCIe TX-RX Signal Docking Jump GPU Cord M88 Series
Product model: M88 series products
Product name: PCI-E adapter board extension cable male to male, female to female
Application: Jump, PCIe signal extension
Speed bandwidth: PCIe 4.0
Wire length: 3~100cm (line length customization is supported)
Friendly tips: this product compatibility problems, incorrect assembly, or improper operation will burn your equipment. Only professional engineers designated purchase. This product is non-refundable and non-exchangeable. Please consider and confirm before placing an order.
Description of wire length:
The length of wire in our shop refers to the part of the visual wire, excluding PCB and connector lengths. Please refer to the size mark of 5cm in the figure below.
Note for purchase:

1. When plugging in the line must be clear about the direction, do not insert the reverse or insert the offset position, to prevent burning equipment, plug the line first hold the device socket and then plug the line, to avoid excessive force will be socket pins broken. The second end of the wire and the board welding within 2cm of the bend is prohibited to prohibit pulling.
2. various motherboards and equipment signal driving ability and other conditions are different, the results of our test does not guarantee that your test results are consistent, as long as the extension cord is connected, the signal will have loss, the requirements, please do not buy.
3. graphics card or motherboard is an electronic device will increase with time and aging oxidation, and then connected to the extension cord will only be more unstable. Do not support old equipment. More than four years. Please do not buy.