Darkside 120mm Single Radiator Foam Gasket | 1mm Thickness, Black (DS-0388)

This DarkSide 120 mm single radiator gasket is a 1 mm thick black foam frame that sits between the radiator and the fans, or between the radiator and the case. It closes the gaps where air would escape around the fan frames and keeps vibration from the fans away from the radiator and the case. It is made from 3M foam with a self-adhesive backing on one side and is sized for single 120 mm radiators and fans.

Properties

• Type: Radiator gasket, foam
• Size: 120 mm single (1x 120 mm)
• Thickness: 1 mm
• Material: 3M performance foam
• Backing: Self-adhesive, one side
• Color: Black
• Pieces in the pack: 1

What the gasket does

• Reduces noise from fan vibration between the radiator and the fans, or between the radiator and the case
• Seals the gap around the fan frames so the air goes through the radiator instead of around it
• Helps the fans build up static pressure through the radiator core

Self-adhesive 3M foam

The gasket is cut from 3M performance foam with a self-adhesive backing on one side. Peel off the liner and stick the frame onto the radiator so the holes line up with the fan screw holes, then mount the fans or the case panel as usual.

Thickness

At 1 mm the gasket keeps a low profile. It does not spoil the look of the build, and the usual fan screws are still long enough after the gasket is fitted.

Technical data

• Type: Radiator foam gasket
• Size: 120 mm single (1x 120 mm)
• Thickness: 1 mm
• Material: 3M performance foam
• Backing: Self-adhesive, one side
• Hole spacing: 15 mm
• Color: Black

Notes

• DarkSide makes these gaskets for single, dual, triple and quad radiators. ModMyMods carries the 120 mm, 140 mm, 280 mm, 360 mm and 480 mm sizes in 1 mm, and the 360 mm size also in 3 mm. This listing is the 120 mm single gasket, 1 mm thick.
• Check the hole pattern of your radiator against the gasket before you peel off the liner.

In the box

• 1x Darkside 120mm Single Radiator Foam Gasket | 1mm Thickness