Your Browsing History
Meet Your Seller
Visit EmpressTech Store
FOLLOW
1PCS Module TTL UART to for LIN Can Bus Converter Data Analyzer TJA1020 K_LINE Date Bus TJA1021 Chip LINTTL3
- It is a TTL_UART to for LIN bus module.The module uses TJA1021 IC.It is mainly used for communication monitoring and maintenance for LIN bus equipment.; The measured baud rate of the module can reach 57600bps,and the recommended maximum operating frequency is less than 20Kbps.; Power supply anti-reverse connection protection, for LIN bus anti-surge protection; Compatible with 3.3V/5V microcontroller system; When the module is connected to the computer's COM port,the computer can receive data,but it cannot communicate with your slave device as a host.The computer's com port cannot generate the 13-bit start bit in the for LIN protocol,but it can be connected to a development board such as a microcontroller.
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
Product description TTL UART to For LIN Can Bus Converter Data Analyzer TJA1020 K_LINE Date Bus TJA1021 Chip LINTTL3 For Communication Monitoring 1.
Description: It is a TTL_UART to for LIN bus module. The module uses TJA1021 IC. It is mainly used for communication monitoring and maintenance of LIN bus equipment. 2.
Feature: 1 Pure data signal conversion 2 Its data is stable 3 It has a green power indicator that shows the working status. 4 It can monitor and maintain LIN bus device communication.
Description: 1
Product Name: for TTL_UART to LIN Bus Module 2
Product Chip: TJA1021 (Has been changed to fully compatible and more stable performance SIT1021T) 3
Working Voltage: DC 12V/24V 4
Work Temperature: -25~85 5
Work Humidity: 5%~95%RH 6
Size: 43*20*12mm 4.
Specific Function Introduction: 1 The measured baud rate of the module can reach 57600bps, and the recommended maximum operating frequency is less than 20Kbps. 2 This module is just a level conversion module and does not participate in conversion analysis such as software protocols. 3 When the module is connected to the computer's COM port, the computer can receive data, but it cannot communicate with your slave device as a host. The computer's com port cannot generate the 13-bit start bit in the LIN protocol, but it can be connected to a development board such as a microcontroller. 4 Power supply anti-reverse connection protection, LIN bus anti-surge protection 6 Compatible with 3.3V /5V microcontroller system
Pin description:
VIN: Power supply positive pole (DC 12V/24V)
INH: Used in host mode (please refer to the
TJA1021 PDF) LIN: LIN
BUS GND: Power supply negative pole
TX: for TTL serial port data output
SLP: Sleep
RX: for TTL serial port data input
GND: Ground wire (Connected to MCU) See More
Description: It is a TTL_UART to for LIN bus module. The module uses TJA1021 IC. It is mainly used for communication monitoring and maintenance of LIN bus equipment. 2.
Feature: 1 Pure data signal conversion 2 Its data is stable 3 It has a green power indicator that shows the working status. 4 It can monitor and maintain LIN bus device communication.
Description: 1
Product Name: for TTL_UART to LIN Bus Module 2
Product Chip: TJA1021 (Has been changed to fully compatible and more stable performance SIT1021T) 3
Working Voltage: DC 12V/24V 4
Work Temperature: -25~85 5
Work Humidity: 5%~95%RH 6
Size: 43*20*12mm 4.
Specific Function Introduction: 1 The measured baud rate of the module can reach 57600bps, and the recommended maximum operating frequency is less than 20Kbps. 2 This module is just a level conversion module and does not participate in conversion analysis such as software protocols. 3 When the module is connected to the computer's COM port, the computer can receive data, but it cannot communicate with your slave device as a host. The computer's com port cannot generate the 13-bit start bit in the LIN protocol, but it can be connected to a development board such as a microcontroller. 4 Power supply anti-reverse connection protection, LIN bus anti-surge protection 6 Compatible with 3.3V /5V microcontroller system
Pin description:
VIN: Power supply positive pole (DC 12V/24V)
INH: Used in host mode (please refer to the
TJA1021 PDF) LIN: LIN
BUS GND: Power supply negative pole
TX: for TTL serial port data output
SLP: Sleep
RX: for TTL serial port data input
GND: Ground wire (Connected to MCU) See More
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by EmpressTech Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...















