Your Browsing History
Meet Your Seller
PCI Express 5.0/4.0 Dual Oculink SFF-8611 4i to Dual Gen-Z 1C (EDSFF) E1.S SSD Adapter with SATA Power Port for 9.5/15/25mm EDSFF 1U Short SSD with Heat Sink
- 1) Oculink SFF-8611 to Gen-Z 1C (EDSFF) E1.S SSD adapter, each ouclink port can connect to one SSD. The converter can be installed inside your system via the oculink interface.
- 2) This converter can connect two GEN-Z SSDs in E1.S. Suitable for 9.5mm/15mm/25mm thickness SSD with heat sink. (such as PM9A3 PM9D3 P5801X)
- 3) Note: Only thick EDSFF E1.S SSD is supported, thin models cannot be installed.
- 4) The card uses the EDSFF protocol to transmit PCI Express 5.0/4.0 signals. The data transfer rate is up to 64Gbps, (note: the hard drive and computer motherboard determine the actual speed).
- 5) Note: Installing 2 EDSFF E1.S SSDs on the adapter card consumes a lot of power. Please be sure to connect the SATA power supply and ensure that the machine power supply is sufficient. Insufficient power supply will cause a blue screen of death or disk drop and other failures!
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
1) Oculink SFF-8611 to Gen-Z 1C (EDSFF) E1. S SSD adapter, each ouclink port can connect to one SSD. The converter can be installed inside your system via the oculink interface.
2) This converter can connect two GEN-Z SSDs in E1. S. Suitable for 9.5 mm/15mm/25mm thickness SSD with heat sink. (such as PM9A3 PM9D3 P5801X)
3) Note: Only thick EDSFF E1. S SSD is supported, thin models cannot be installed.
4) The card uses the EDSFF protocol to transmit PCI Express 5.0 / 4.0 signals. The data transfer rate is up to 64Gbps, (note: the hard drive and computer motherboard determine the actual speed).
5) Note: Installing 2 EDSFF E1. S SSDs on the adapter card consumes a lot of power. Please be sure to connect the SATA power supply and ensure that the machine power supply is sufficient. Insufficient power supply will cause a blue screen of death or disk drop and other failures!
2) This converter can connect two GEN-Z SSDs in E1. S. Suitable for 9.5 mm/15mm/25mm thickness SSD with heat sink. (such as PM9A3 PM9D3 P5801X)
3) Note: Only thick EDSFF E1. S SSD is supported, thin models cannot be installed.
4) The card uses the EDSFF protocol to transmit PCI Express 5.0 / 4.0 signals. The data transfer rate is up to 64Gbps, (note: the hard drive and computer motherboard determine the actual speed).
5) Note: Installing 2 EDSFF E1. S SSDs on the adapter card consumes a lot of power. Please be sure to connect the SATA power supply and ensure that the machine power supply is sufficient. Insufficient power supply will cause a blue screen of death or disk drop and other failures!
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 45 days
- Return for replacement within: 30 days
- This item is covered by TechDen Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...