Mount-It! Laptop Arm Mount for Desk, Gas Spring, Clamp or Grommet, 17 Inch | Laptop desk mount, 22 lb total, 13.2 lb laptop, VESA 75x75 100x100, 360 swivel, 90 tilt, 23.5 in reach, 9-18.75 in height

A laptop flat on the desk sits too low and takes up room you need. The Mount-It! Laptop Arm Mount for Desk is a laptop stand on a gas spring arm that lifts the screen to eye level and keeps the desktop open. Designed for laptops, it adjusts from 9 to 18.75 inches in height.

The arm swivels 360 degrees, tilts 90 degrees, and reaches from 10.5 to 23.5 inches, so you can pull the screen in, push it aside, or turn it toward a video call. A hex key adjusts the spring tension for heavier or lighter laptops. The 11.75 x 11 inch ventilated tray holds laptops up to 17 inches and 13.2 lbs, with side holders that open from 9.5 to 16.5 inches, traction pads, and locking buckles. Measure your laptop's width and check its weight before ordering. This mount positions a screen and is not meant as a typing surface, so use an external keyboard and mouse.

Choose the included C-clamp or grommet base, for desks up to 3.1 inches thick; the grommet base mounts through a hole in the desk. Setup goes in stages: secure the base to the desk, fit the side holders onto the tray, attach the tray to the arm's VESA 75x75 and 100x100 head with the four included screws, slide in the laptop, and set the spring tension with the hex key. Total capacity is 22 lbs, with a 13.2 lb limit for the laptop. All parts and tools needed for assembly come in the box, including a key with a Phillips tip for the tray screws. Cable management clips keep cords routed along the arm.

Mount-It! backs this laptop arm with a lifetime manufacturer warranty and US-based product specialists available during standard business hours.