YEPLOOK 6Pin to 4 Molex IDE 4Pin PATA Perif PERIPHERAL Power Cable for Corsair RM RM-i RM-x RM-e CS-M CX-M TX-M SF HX HX-i AX-i Type 3 & Type 4 Modular Powers, 18AWG Tinned Copper Wire, 20+3x6 inch

YEPLOOK 6Pin to 4 Molex IDE 4Pin PATA Perif PERIPHERAL Power Cable for Corsair RM RM-i RM-x RM-e CS-M CX-M TX-M SF HX HX-i AX-i Type 3 & Type 4 Modular Powers, 18AWG Tinned Copper Wire, 20+3x6 inch

*YEPLOOK Store Purchase Notice:

1. All images are for reference only. For actual photos, please contact us.

2. There are two empty pins on the 6Pin connector, because the molex IDE 4Pin only requires 4 wires for power supply. It is a normal and correct pinouts, is not a quality defect.

3. The molex port comes in two shapes, both of which have identical functionality and performance, and are compatible with Corsair modular powers listed below. We ship randomly. If you prefer either one, please tell us in advance before shipment.

4. We are responsible for quality inspection and customer support of cables directly sold from YEPLOOK Store.

Description

Brand: YEPLOOK

Port 1: 6 Pin Male Connector

Port 2: 4 x Molex IDE 4Pin Female Connector Straight

Cable Length: about 50+15+15+15 CM (about 20+6+6+6 inches)

Cable Gauge: 18AWG standard tinned copper wire

Package List: 1 Piece 6Pin to 4x Molex IDE 4Pin Power Cable for Corsair Type 3 & Type 4 Modular Powers.

Advantages

1. 18AWG Tinned copper wire can prevent insulation rubber from sticky.

2. Soft flat ribbon cables are wieldy, have a greater flexibility allowing tighter folding and management.

3. Flexible & durable to prevent corrosion and provide a long lifespan.

How to Connect?

1. 6Pin connector plug into modular power side (only for Corsair some types of as listed below).

2. Molex 4Pin connector plug into devices with molex port, such as cooler fan, motherboard, floppy drive, disc drive, old optical drives ect.

This 6Pin to 4 Molex IDE 4Pin Power Cable is fully compatible with Corsair Type 3 & Type 4 Modular Powers

Type 3:

For Corsair AX-i: AX1500i, AX1200i, AX860i, AX760i

For Corsair HX-i: HX1200i, HX1000i, HX850i, HX750i, HX650i, HX550i (Blue label)

For Corsair HX Gold: HX1050, HX850, HX750, HX650

For Corsair RM: RM1000, RM850, RM750, RM650, RM550, RM450 (Yellow label)

For Corsair CX-M: CX850M, CX750M, CX600M, CX500M, CX450M, CX430M

For Corsair CX: CX750, CX650, CX600, CX550, CX500, CX450, CX430

For Corsair CS-M: CS850M, CS750M, CS650M, CS550M, CS450M

For Corsair TX-M: TX850M, TX750M, TX650M, TX550M

Type 4:

For Corsair AX/AX-i: AX1600i, AX1000 Titanium, AX850 Titanium

For Corsair SF: SF750, SF600, SF450

For Corsair RM Gold: RM850, RM750, RM650, RM550, RM450 Gold (White label 2021 Version)

For Corsair RM-x: RM1000x, RM850x, RM750x, RM650x, RM550x (Not for RM-x Shift Version)

For Corsair RM-i: RM1000i, RM850i, RM750i, RM650i, RM550i

For Corsair RM-e: RM1200e, RM1000e, RM850e, RM750e

For Corsair HX Platinum: HX1200, HX1000, HX850, HX750 Platinum (White label)

For Corsair HX-i Platinum: HX1500i, HX1200i, HX1000i (White label Type 4 Version)

Not for Corsair AX1200 Gold.

Not for Corsair Type 2 AX850 Gold, AX750 Gold, AX650 Gold.

Not for Corsair Type 5 modular powers. Not for Corsair RM850x SHIFT, SF850, SF1000.

Not for modular powers of other brands and models.

Different modulars use different pinouts. Mix use cables may cause damage. If your modular is not listed, please check compatibility with us to ensure proper installation.