Stud Finder
Measuring Tools
Digital Wood Moisture Meter
Digital Pin Type Wood Moisture Meter
Digital Infrared Thermometer
Digital Infrared Thermometer Gun Non Contact Laser Temperature Gun
Mecurate Rafter Square
Squares & Levels
Digital Angle Gauge & Protractor
Mecurate Digital Torpedo Level and Angle Gauge
Miter Saw Protractor
Rafter square is an essential tool for carpenter, whether you are working on rafter layout or just need a quick 45° or 90° angle measurement, this rafter square is committed to delivering the most refined, accurate, and easy-to-use layout square. Our instruction rafter squares deliver on our commitment and legacy of providing quality measurement solutions while our other rafter squares deliver a full line of solutions to meet any measuring needs.
Light Weight
Over standard Aluminum alloy material offers super light weight.Makes it convenient to carry with.
Identifiable Scale
The rafter square finishing features low glare and protective powder coated.
It has permanent deep markings and white graduations for max Readability any lighting.
Precise and Durable
CNC-machined edges enhance the precision and durability, withstand the rigors of daily use.
APPLICATION
- Parallel to the degrees scale a further groove is milled with two scales for mitre (compound) cuts.
- The upper one is for hip rafters (labelled HIP-VAL on the square) and the lower one is for common rafters (labelled COMMON on the square).
- Place the lip side against the board and pressed against it at the pivot point (labelled PIVOT on the square).The other end is rotated away from the edge of the board until the edge and the desired angle are congruent. Now the saw cut can be marked. Note that you will always cut along the complementary angle.
- If the angle at the edge is 30° then the angle you will mark will be 60°.
- Set the pivot at the edge of the board and then rotate the square around that point until the edge of the board aligns with the correct mark on the "Common" scale - marked in red in the picture.
- Then draw a line along the ruled side of the square.
- The diamond cut out used to square a line that is drawn across the board to allow you to then make a 90-degree line perfectly from your line to the edge of the board.
- If you need to find the level of a surface but, for some reason, you do not have a bubble level, you can improvise with the rafter square and a plumb-bob.
 Mecurate Stud Finder Wall Scanner Sensor |  Digital level |  Rafter square |  Metric Rafter Square with Carpentry Pencil |  7-Inch Rafter Square and 12-Inch Combination Square Set |  Combination square | |
|---|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — | — |
| Price | — | — | — no data | — | — | — no data |
| Range | 0-100% | 0-180° | 0-300mm | 18cm | 7-Inch and 12-Inch | 0-300mm |
| Tolerance | ±0.1% | ±0.05° | ±0.1mm | 0.1cm | ±0.1 | ±0.1mm |
| Battery | 9V batteries | 1.5V AAA batteries | no battery included | / | / | no battery included |
| Display | Back-lit LCD | Back-lit LCD | / | / | / | / |
| Application | Stud Finder | Use as digital level, measure/set angles, check relative angles. High visibility reverse contrast display auto-rotates when turned. Strong magnetic base and v-grooves all around fit conduit contour. | Suitable for the measurement, Mecurate rafter square can be used as a protractor, woodworking compass, triangle square and frame square. The horizontal base is convenient for marking, smooth and practical. | Accurate angle measurement and marking | DIY, marking and measuring | Great for marking 45 and 90 degree angles, and can also function as a handy gauge for transferring precision angles and other measurements; essential for use in your rafter, deck, stair and roofing projects, and in other general carpentry operations |
Rafter square is an essential tool for carpenter, whether you are working on rafter layout or just need a quick 45° or 90° angle measurement, this rafter square is committed to delivering the most refined, accurate, and easy-to-use layout square. Our instruction rafter squares deliver on our commitment and legacy of providing quality measurement solutions while our other rafter squares deliver a full line of solutions to meet any measuring needs.
Light Weight
Over standard Aluminum alloy material offers super light weight.Makes it convenient to carry with.
Identifiable Scale
The rafter square finishing features low glare and protective powder coated.
It has permanent deep markings and white graduations for max Readability any lighting.
Precise and Durable
CNC-machined edges enhance the precision and durability, withstand the rigors of daily use.
APPLICATION
- Parallel to the degrees scale a further groove is milled with two scales for mitre (compound) cuts.
- The upper one is for hip rafters (labelled HIP-VAL on the square) and the lower one is for common rafters (labelled COMMON on the square).
- Place the lip side against the board and pressed against it at the pivot point (labelled PIVOT on the square).The other end is rotated away from the edge of the board until the edge and the desired angle are congruent. Now the saw cut can be marked. Note that you will always cut along the complementary angle.
- If the angle at the edge is 30° then the angle you will mark will be 60°.
- Set the pivot at the edge of the board and then rotate the square around that point until the edge of the board aligns with the correct mark on the "Common" scale - marked in red in the picture.
- Then draw a line along the ruled side of the square.
- The diamond cut out used to square a line that is drawn across the board to allow you to then make a 90-degree line perfectly from your line to the edge of the board.
- If you need to find the level of a surface but, for some reason, you do not have a bubble level, you can improvise with the rafter square and a plumb-bob.
Mecurate Stud Finder Wall Scanner Sensor | Digital level | Rafter square | Metric Rafter Square with Carpentry Pencil | 7-Inch Rafter Square and 12-Inch Combination Square Set | Combination square | |
|---|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — | — |
| Price | — | — | — no data | — | — | — no data |
| Range | 0-100% | 0-180° | 0-300mm | 18cm | 7-Inch and 12-Inch | 0-300mm |
| Tolerance | ±0.1% | ±0.05° | ±0.1mm | 0.1cm | ±0.1 | ±0.1mm |
| Battery | 9V batteries | 1.5V AAA batteries | no battery included | / | / | no battery included |
| Display | Back-lit LCD | Back-lit LCD | / | / | / | / |
| Application | Stud Finder | Use as digital level, measure/set angles, check relative angles. High visibility reverse contrast display auto-rotates when turned. Strong magnetic base and v-grooves all around fit conduit contour. | Suitable for the measurement, Mecurate rafter square can be used as a protractor, woodworking compass, triangle square and frame square. The horizontal base is convenient for marking, smooth and practical. | Accurate angle measurement and marking | DIY, marking and measuring | Great for marking 45 and 90 degree angles, and can also function as a handy gauge for transferring precision angles and other measurements; essential for use in your rafter, deck, stair and roofing projects, and in other general carpentry operations |
Stud Finder
Measuring Tools
Digital Wood Moisture Meter
Digital Pin Type Wood Moisture Meter
Digital Infrared Thermometer
Digital Infrared Thermometer Gun Non Contact Laser Temperature Gun
Mecurate Rafter Square
Squares & Levels
Digital Angle Gauge & Protractor
Mecurate Digital Torpedo Level and Angle Gauge
Miter Saw Protractor