Voltage Reference Board AD584K 4 Channel Micro USB Programmable Benchmark Voltage Calibration Module Voltage Reference Source Board DC5V
- Reference Module: Programmable 4 channel voltage calibration module, with built in charging management, loading and unloading , ensuring and .
- Multimeter Calibration: Use for HP3458A 8 and a half digit multimeter for calibration (use after sufficient preheating), with a calibration value of 6 and a half digit counting, accurate and.
- With Indicator Light: The voltage calibration board is equipped with indicator light. Press and hold for 2 seconds before turning on. After turning on, all 4 indicators will light up simultaneously.
- Output Voltage Setting: With reference voltage source, this module can set 4 commonly used output voltages, namely 10.0V, 7.50V, 5.00V, and 2.50V, with a wide range of applications.
- Micro USB Interface: This module has Micro USB charging and discharging interface, with 2mm copper test socket, easy to insert into a multimeter to measure or calibrate other instruments.
1. Reference Module: Programmable 4 channel voltage calibration module, with built in charging management, loading and unloading , ensuring and .
2. Multimeter Calibration: Use for HP3458A 8 and a half digit multimeter for calibration (use after sufficient preheating), with a calibration value of 6 and a half digit counting, accurate and.
3. With Indicator Light: The voltage calibration board is equipped with indicator light. Press and hold for 2 seconds before turning on. After turning on, all 4 indicators will light up simultaneously.
4. Output Voltage Setting: With reference voltage source, this module can set 4 commonly used output voltages, namely 10.0V, 7.50V, 5.00V, and 2.50V, with a wide range of applications.
5. Micro USB Interface: This module has Micro USB charging and discharging interface, with 2mm copper test socket, easy to insert into a multimeter to measure or calibrate other instruments.
Spec:
Item Type: Reference Voltage Board
Material: PCB
Battery: 1 x 3.7V 14250 Battery (battery not included)
Battery: Benchmark Special Battery
Charging and Discharging Interface: Micro USB
Voltage: DC5V
Output Interface: 2mm Banana Socket
How to Use:
Direct Use.
packing list:
1 x Reference Voltage Module
Notice:
The reference voltage does not need to be fully charged every 2 months. The board has built in charging management and discharge . Do not reverse the polarity of the battery.
Voltage Reference Board AD584K 4 Channel Micro USB Programmable Benchmark Voltage Calibration Module Voltage Reference Source Board DC5V
- Reference Module: Programmable 4 channel voltage calibration module, with built in charging management, loading and unloading , ensuring and .
- Multimeter Calibration: Use for HP3458A 8 and a half digit multimeter for calibration (use after sufficient preheating), with a calibration value of 6 and a half digit counting, accurate and.
- With Indicator Light: The voltage calibration board is equipped with indicator light. Press and hold for 2 seconds before turning on. After turning on, all 4 indicators will light up simultaneously.
- Output Voltage Setting: With reference voltage source, this module can set 4 commonly used output voltages, namely 10.0V, 7.50V, 5.00V, and 2.50V, with a wide range of applications.
- Micro USB Interface: This module has Micro USB charging and discharging interface, with 2mm copper test socket, easy to insert into a multimeter to measure or calibrate other instruments.
1. Reference Module: Programmable 4 channel voltage calibration module, with built in charging management, loading and unloading , ensuring and .
2. Multimeter Calibration: Use for HP3458A 8 and a half digit multimeter for calibration (use after sufficient preheating), with a calibration value of 6 and a half digit counting, accurate and.
3. With Indicator Light: The voltage calibration board is equipped with indicator light. Press and hold for 2 seconds before turning on. After turning on, all 4 indicators will light up simultaneously.
4. Output Voltage Setting: With reference voltage source, this module can set 4 commonly used output voltages, namely 10.0V, 7.50V, 5.00V, and 2.50V, with a wide range of applications.
5. Micro USB Interface: This module has Micro USB charging and discharging interface, with 2mm copper test socket, easy to insert into a multimeter to measure or calibrate other instruments.
Spec:
Item Type: Reference Voltage Board
Material: PCB
Battery: 1 x 3.7V 14250 Battery (battery not included)
Battery: Benchmark Special Battery
Charging and Discharging Interface: Micro USB
Voltage: DC5V
Output Interface: 2mm Banana Socket
How to Use:
Direct Use.
packing list:
1 x Reference Voltage Module
Notice:
The reference voltage does not need to be fully charged every 2 months. The board has built in charging management and discharge . Do not reverse the polarity of the battery.
Walfront
Our industrial products are varied and practical. Your needs can be met here.
Electrical Products
Industrial Tools
Instruments
Musical Instrument Accessories
Other Products