ATX 6/8Pin 12V to 5V 12V Power Breakout Board Module, ATX PSU Adapter with 4x4PIN & 4x5PIN Output Ports for Powering Multiple 2.5" 3.5" SATA HDD SSD for DIY NAS Storage Rig

This ATX power breakout board module draws 12V power input from ATX power supplys 6pin or 8pin connector, and converts it into regulated 5V and 12V power outputs for mass storage devices. It offers four 4PIN and four 5PIN power ports, greatly expanding available power interfaces to run several 2.5inch SSD and 3.5inch SATA mechanical hard drives simultaneously. It is an excellent hardware solution for selfbuilt NAS, multidisk mining storage rig and ATX PSU repurposing projects.

Built with highquality printed circuit board and reinforced soldering points, this breakout board minimizes voltage fluctuation when multiple hard drives spinup and work under heavy load. Its compact footprint will not occupy too much internal chassis space. All output ports adopt direct plugin design, making installation, replacement and troubleshooting much easier for DIY builders.

Critical safety reminder: Always stay within the maximum current and power rating of your ATX power supply and this breakout module. Overloading will cause overheating, hardware failure or safety hazards. This unit handles power conversion only, it does NOT transmit any data signal. Doublecheck your ATX PSU 6/8pin pin definition before poweron to avoid incorrect wiring damage. This board is intended for internal chassis use only, not for external application.