Shurtape DF-65 Double-Sided Flat Paper Tape: 3/4 in x 36 yds. (Natural)

Shurtape DF-65 Double-Sided Flat Paper Tape is a flatback paper coated on both sides (AKA double-faced or double-coated) with an aggressive rubber-based adhesive. Shurtape DF-65 is used for mounting, holding, splicing, tabbing, and fastening applications that demand aggressive adhesion. For use on a variety of substrates, DF 65 offers good tensile strength, durability, and wrinkle-resistance, making it a versatile solution for a variety of tasks. Made in the U.
S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 18mm x 33m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: flatback paper
- Adhesive: rubber-based
- Release Liner: white paper
- Standards Met: CID A-A-180C, Type II, Grade B
- Thickness: 5 mils (carrier, adhesive)
- Adhesion: 65 ounces per inch (to stainless steel test panel)
- Tensile Strength: 33 pounds per inch (longitudinal)
- Service/Operating Temperature: 50F to 225F
- Elongation: 3 %