Shurtape CP-66 Contractor Grade Masking Tape: 1-1/2 in. x 60 yds. (Natural)

Shurtape CP-66 Contractor Grade Masking Tape is a paper masking tape designed for commercial and residential painting and construction, industrial masking, holding and packaging. It is a paint and sundries industry standard. Shurtape CP 66 is good for applications where conformity to irregularly-shaped surfaces and good quick stick are required. This tape is used on many different types of surfaces including windows, metal door jams, and molding and trim. Also adheres well to poly sheeting and vinyl substrates. Made in the U.S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 36mm x 55m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: crepe paper
- Adhesive: rubber-based
- Standards Met: ASTM D 6123/D 6123M-97 (2012), Type I; PPP-T-42C, Type I
- Thickness: 5.6 mils (carrier, adhesive)
- Adhesion: 38 ounces per inch (to stainless steel test panel)
- Tensile Strength: 23 pounds per inch (longitudinal)
- Service/Operating Temperature: 50F to 150F
- Elongation: 8 %