Shurtape SF-682 ShurFLEX HVAC Metalized Duct Tape: 3 in x 60 yds. (Metalized Silver)

Shurtape SF-682 Shurflex HVAC Metalized Duct Tape is a contractor-grade cloth duct tape used in the HVAC industry to seam, connect, splice, patch and seal sheet metal and flex duct, rigid duct boards, air vents, insulation, fibrous filter banks, and pollution collection systems. It can also be used for waterproof packaging. benefits of the tape include waterproof backing; provides moisture-free, airtight seal; flexible and conformable; easy unwind; hand tearable; no release liner to discard (linerless); and the tape color/appearance is designed to match sheet metal, flex duct, and duct board.

The metallic coating put on the tape gives it a chrome-like look and feel. Shurtape SF 682 Duct Tape is the same tape as SF 683, but without the printing on the tape. Made in the U.
S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 72mm x 55m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: polyethylene film with a polyester/cotton blend cloth carrier
- Adhesive: natural rubber
- Thickness: 10 mils (carrier, adhesive)
- Adhesion: 55 ounces per inch (to stainless steel test panel)
- Tensile Strength: 25 pounds per inch (longitudinal)
- Service/Operating Temperature: 50F to 200F
- Elongation: 18 %
- Flame Spread Index: 0
- Smoke Development Index: 0