FrogTape Multi-Surface Painters Tape: 0.94 in. x 60 yds. (Green) [6 rolls/pack] - OEM

Get super sharp paint lines on your next project with FrogTape Multi-Surface Painters Tape. This premium painter's tape is treated with exclusive PaintBlock Technology to seal tape edges and prevent paint bleed. Featuring medium adhesion, this multi-surface painter's tape is ideal for a variety of surfaces and applications. Plus, the solvent-free, high performance adhesive bonds quickly to the surface, so there is no wait to paint.

As consumers and pros look for greener solutions to support their everyday tasks, FrogTape is taking responsibility to do the same for their products. Thats why they're taking steps with FrogTape Signature Series painters tapes to use more sustainable materials. Country of Origin: United States.

1. Clean the surface to be masked. Make sure it is dust-free and dry.
2. If the surface has been recently painted, make sure the paint has cured.
3. For accurate placement, adhere FrogTape in short sections to avoid stretching the tape.
4. Make sure FrogTape is flush to the edge that you will be painting.
5. Using a putty knife or 5-in-1 tool, press the tape you positioned to burnish it to the surface you are masking.

1. Remove the tape immediately after you are finished painting. This will help prevent paint from bridging over the tape and tearing when you remove it. When latex paint begins to dry, it becomes rubbery (like a rubber band) and has a tendency to pull.
2. Remove the tape slowly and pull at a 90-degree angle.
3. If the new paint does begin to tear, gently score the edges with a razor blade.
4. If the tape begins to tear the wallboard when it is being removed, this likely means you have masked on a poorly bonded surface. Try softening the tape's adhesive with a blow dryer.