FrogTape Advanced Painter's Tape: 1-1/2 in. x 45 yds. (Green)

FrogTape Advanced Painter's Tape offers elevated performance when it comes to super sharp paint lines, conformability around curves and removal without tearing or shredding. This ultra-premium painter's tape is treated with exclusive PaintBlock Technology to seal tape edges and prevent paint bleed. The tape also offers 28-day indoor clean removal with Nano Technology, which protects against weakening of the bond between the adhesive and backing. Plus, the washi paper backing is thin, yet two times stronger than crepe paper painter's tape for better conformability, shred-resistance and tear-free removal, giving you the confidence to tackle hard projects. Country of Origin: United States.

1. Clean the surface to be masked. Make sure it is dust-free and dry.
2. If the surface has been recently painted, make sure the paint has cured.
3. For accurate placement, adhere FrogTape in short sections to avoid stretching the tape.
4. Make sure FrogTape is flush to the edge that you will be painting.
5. Using a putty knife or 5-in-1 tool, press the tape you positioned to burnish it to the surface you are masking.

1. Remove the tape immediately after you are finished painting. This will help prevent paint from bridging over the tape and tearing when you remove it. When latex paint begins to dry, it becomes rubbery (like a rubber band) and has a tendency to pull.
2. Remove the tape slowly and pull at a 90-degree angle.
3. If the new paint does begin to tear, gently score the edges with a razor blade.
4. If the tape begins to tear the wallboard when it is being removed, this likely means you have masked on a poorly bonded surface. Try softening the tape's adhesive with a blow dryer.