JVCC V-36P Premium Colored Vinyl Tape: 3 in x 36 yds. (Red) - OEM

JVCC V-36P Premium Colored Vinyl Tape is a superior quality vinyl tape used for color coding; lane marking and safety coding to meet OSHA requirements; temporary decorating and striping on vehicles, boats and sporting equipment. Also to identify restricted or hazardous areas; masking for hard chrome plating and anodizing; harness and pipe wrapping; and duct and joint sealing. JVCC V-36P Vinyl Tape is also known as Dance Floor Tape, Marley Tape, or Splice Tape and it is 1 mil thicker and has 25% more adhesion than regular JVCC V-36 Vinyl Tape which gives it its premium name.

Features & Benefits

• "Write-on" capability.
• Provides very effective vapor/moisture barrier.
• Highly conformable and good abrasion/impact/rupture resistance.
• Resistant to aging, sun, water, oil, acids/alkalies/corrosive chemicals.
• No corrosion to copper, brass, steel, or aluminum.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 75mm wide. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. In the photo the colors are the following (starting from the leftmost column and working down): Dark Blue, Medium Blue, Sky Blue, Grey, Yellow, Orange, Red, Purple, Dark Emerald Green, Kelley Green, Light Green, Black, White, Clear, Medium Brown, Dark Brown.
Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www. P65Warnings. ca. gov/.

Technical Information
- Core: 3 inch diameter neutral
- Backing/Carrier: soft polyvinyl chloride (SPVC) film
- Adhesive: synthetic rubber resin
- Standards Met: CID A-A-1689B Type II (cancelled PPP-T-66E Type 1 Class 2)
- Thickness: 6 mils (carrier, adhesive)
- Adhesion: 22 ounces per inch (to stainless steel test panel)
- Tensile Strength: 16 pounds per inch (longitudinal)
- Service/Operating Temperature: -20F to 176F
- Elongation: 150 %