- Free 30-day Returns
Meet Your Seller
JVCC UHMW-PE-20 UHMW Polyethylene Film Tape: 1/2 in. x 18 yds. (Natural / Translucent) - OEM
- Carrier/Backing: UHMW (Ultra High Molecular Weight) polyethylene film. Adhesive: acrylic. Release Liner: blue poly film.
- Core: 3 inch diameter
- Adhesive: acrylic
- Release Liner: blue poly film
Any questions? Our AI beta will help you find out quickly.
JVCC UHMW-PE-20 UHMW Polyethylene Film Tape is a 20 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock-absorbing properties. Outwears Teflon many times over and is a good replacement when high-temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; slide tape replacement on top of track saws, dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Wound on a blue poly liner. Made in the U.S.
NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 12.5mm wide. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information
- Core: 3 inch diameter
- Backing/Carrier: UHMW (Ultra High Molecular Weight) polyethylene film
- Adhesive: acrylic
- Release Liner: blue poly film
- Thickness: 21.8 mils (carrier, adhesive) 1.8 mils (adhesive) 20 mils (carrier)
- Adhesion: 60 ounces per inch (to stainless steel test panel)
- Tensile Strength: 50 pounds per inch (longitudinal)
- Service/Operating Temperature: up to 300F
- Elongation: 300 %
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by FindTape Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory















