JVCC CFL-5A Copper Foil Tape: 3/8 in. x 36 yds. (Copper) - OEM

JVCC CFL-5A Copper Foil Tape is a 1-ounce rolled copper foil which provides excellent solderability and conformity. Used for EMI/RFI shielding of small electromagnetic components (i.e. transformer/reactor coils) and cable splices; repairing, modifying & prototype designing of wiring boards, supplementary shielding of joints/seams; and flat conductor assemblies. Annealed and non-tarnishing, bright copper color. Its aggressive acrylic adhesive system creates a superior bond. This tape does NOT have conductive adhesive - please see JVCC CFL-5CA for a copper foil tape with conductive adhesive. Flammability: File #130121, UL 510, Section 4. Can also be used for decorative arts & crafts projects. The copper alloy is 110, which is 99.9% pure, it is also rolled and annealed not electrodeposited.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 9.5mm wide. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Toluene, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.

Technical Information
- Core: 3 inch diameter neutral
- Backing/Carrier: copper foil
- Adhesive: acrylic
- Release Liner: 60# paper
- Standards Met: Flammability: File #130121, UL510, Section 4
- Thickness: 3 mils (carrier, adhesive) 1.6 mils (adhesive) 1.4 mils (carrier)
- Adhesion: 61 ounces per inch (to stainless steel test panel)
- Tensile Strength: 36 pounds per inch (longitudinal)
- Service/Operating Temperature: up to 311F
- Elongation: 6 %
- Electrical Resistance: 0.003 ohms per square inch