JVCC DC-SCRIM-9 Double-Sided Scrim Tape: 1/2 in x 75 ft. (Clear) - OEM

JVCC DC-SCRIM-9 Double-Sided Scrim Tape is a thick polyester (PES/PVA) scrim tape coated on both sides (AKA double-coated) with an aggressive, modified solvent-free water-based acrylic adhesive. The adhesive system is extremely aggressive, and will bond well to nearly all materials; even to difficult surfaces like foam, fabrics, PE and PP films. This double-sided tape is used for permanent bonding of plastic, metal, and wood (P. M. W. ) surfaces and is primarily designed for use in bonding carpet and plastic baseboard molding to walls, ceilings, modular units, etc.

It has a good temperature, UV, aging, and water vapor resistance. APEO/APE Free. The tape comes on a gold 90 gr. siliconized paper release liner.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 12mm x 23m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.
Warning: This product can expose you to chemicals including Silica, crystalline (airborne particles of respirable size), which is [are] known to the State of California to cause cancer. For more information go to www. P65Warnings. ca. gov/.

Technical Information
- Core: 3 inch diameter neutral
- Backing/Carrier: polyester (PES/PVA) scrim
- Adhesive: solvent-free water-based modified acrylic
- Release Liner: 90 gr. gold siliconized paper
- Thickness: 9.1 mils (carrier, adhesive)
- Adhesion: 109 ounces per inch (to stainless steel test panel)
- Service/Operating Temperature: -40F to 203F
- Adhesive Weight: 220 grams/square meter