3M Safety-Walk Hazard Slip-Resistant Tape: 2 in. x 60 ft. (Black with Yellow stripes) 613-2x60

3M Safety-Walk Hazard Slip-Resistant Tape features a yellow and black stripe pattern that provides both slip resistance and high-visibility hazard marking in one product. The abrasive mineral surface is bonded to a durable backing with a heavy-duty adhesive for quick, easy application on steps, ramps, entrances, ladders, loading docks, walkways and other traffic areas.

This tape has been NFSI approved as High-Traction and is designed to meet OSHA and ADA coefficient of friction recommendations. The low-profile design helps reduce trip hazards, and the tape resists wrinkling, curling, tearing and lifting under normal foot traffic. Simply peel, apply and press firmly into place; cut to size with scissors as needed.

• Yellow and black hazard stripe marks caution areas while adding slip resistance
• NFSI approved High-Traction surface for steps, ramps and walkways
• Low-profile, self-adhesive design for quick application
• Resists wrinkling, curling, tearing and lifting
• Meets OSHA and ADA coefficient of friction recommendations

Country of Origin: United States.Application Instructions

1. Make sure the surface is clean, dry and smooth, and above 40°F before applying the tape. Repair or replace any damaged surface first.
2. Remove any chipped, cracked or peeling paint, then clean the surface with an appropriate degreaser or solvent wipe and allow it to dry completely.
3. On rough, porous or unpainted concrete, apply a coat of primer and let it dry until no longer tacky, about 15 minutes.
4. Peel back the liner about 1 inch from one end and position the tape on the surface.
5. Continue removing the liner while pressing the tape firmly in place. Avoid touching the adhesive with your fingers.
6. Press the tape into firm contact with the surface using a rubber hand roller, starting at the middle and rolling out toward the edges.
7. On steps, apply the tape about half an inch from the stair edge to help prevent edge curling and premature wear.