e E to SATA Card -E Adapter Express to SATA 3 Converter 4 Port SATA III 6G Expansion Controller Card Adapter IPFS

Specification: Meets Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0 Compliant with -Express v2.0 specification, backward compatible with -Express v1.0. Supports communication speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i. Supports Four SATA Support AHCI1.0 mode and IDE mode Support native command queue (NCQ) Supports FIS based on port multiplier switches or command switches. Hot-swappable and hot-swappable. Compatible with SATA6G, 3G and 1.5G Hard Drives Bus interface: -Express x1 slot(Compatible -E X2 X4 X8 X16 ) Extension ports: 4 SATA3.0 interfaces Feature: with two heat sinks for long time safe working.

System Requirements: Windows 10/8/7 (32/64 bit) / Vista (32/64 bit) / XP/2003/2008/linux

The method of using E to SATA3.0 adapter card is as follows:

1. Connection conditions and solutions of system disk and E to SATA3.0 adapter card:

a. The SATA interface mode of E to SATA3.0 is AHCI mode. If you want to insert the system disk on our card, the premise is that your system disk must be installed in AHCI mode when installing the system on the motherboard. Otherwise, you can't start the system through our card transfer card.

b. If we confirm that the SATA interface installation system is AHCI mode, we can insert the hard disk directly into our card, and then enter the main board BIOS to set the system disk as the first boot.

2. Connection conditions and solutions of common disk and E to SATA3.0:

b. If 1 condition holds, or can not start the system, then to enter the motherboard BIOS, the system can be set as the first boot.

1 x -E TO 4 SATA Expansion Card 1 x Driver CD

1.