R43SG Laptop graphics card external to M.2 nvme PCIe3.0 x4 docking station extension adapter riser eGPU For ITX STX NUC notebook

Except for laptops, this product also supports NUC motherboards, STX motherboards, ITX motherboards, external graphics cards, and M.2 NVMe interface can be used.M.2 key M NVMe External Graphics Card Stand Bracket with PCIe3.0 x4 Riser Cable 25cm 50cm 32Gbs For ITX STX NUC VEGA64 GTX1080ti

Brand name: ADT-

Product name: PCIe x16 to M.2 M-key NVMe extension adapter for eGPU

Product model: R43SG/R43SG-TU

Transfer speed: PCIe3.0 x4 , 32G/bps (Max.)

Wire length: 25cm, 50cm

Graphics card compatibility: supports new graphics cards shipped after 2015.

Application: eGPU for NUC / ITX / STX / Notebook PC (Only supports M.2 NVMe interface, does not support M.2 SATA / M.2 WiFi / M.2 WWAN / USB interface)

Note: The length can be customized, if you need, please contact us.

Cable EMI shielding Description:

EMI Shielding with Conducting Polymer

The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.

Cable Length Description:

R3G series cable length has 25 cm or 50 cm can be selected, the following is the line length of 50 cm. refer to the blue dimension of the figure below.

Power Supply Description:

Supporting power supply is DELL DA-2 8PIN D220P-01/ADP- 220AB12V/18A/220W PSU, or above ATX 500W standard PSU power supply. The power supply should be prepared by the buyer or purchased separately.

Installation steps:

4. finish.