for NVMe SSD Extension Cable Solid Drive Riser Card R44SF/R24SF M2 to PCI-Express 3.0 X4 PCIE 32G/bps M Key Extender

R44SF / R24SF NVMe SSD Extension Cable Solid State Drive Riser Card Support M2 to PCI Express 3.0 X4 PCIE Full Speed 32G/bps

Product model: R44SF NVMe SSD Extension Cable / R24SF NVMe SSD to PCIe x4 Extension Cable

R44SF ,Connector: NVMe SSD

R24SF ,Connector 1: PCIe x4 ,Connector 2: NVMe SSD

Wire length: 10 ~ 30 cm

The length of the wire instructions:

Our wire length refers to the visual wire part, does not include the PCB and connector.

The following models for R24SF - 5 cm, refer to the below dimension.

R44SF is an NVME slot,

R24SF is a PCIE slot,

They are not support laptops, None of Dell's laptops are supported.

The following models for R44SF - 8 cm, refer to the below dimension.

Product advantage:

1. Wire advantages: using the German patent imported wire, using the Lotes connectors which imported from Taiwan, high frequency support PCIe 3.0 X16 8G/bps stable transfer.

2.Cable length: from 5 cm to 80 cm can be customized, our wire has a low impedance, the cable below 60cm can be stable at PCIe3.0 full speed reading and writing.

3.Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF micro short circuit, cable is durability.

4.PCB use high frequency low resistance of materials with high quality, PCB using high TG board, copper thickness thicken to 1oz, gold finger plating enough gold, Good conductive performance, can reduce oxidize higher impedance caused by the crash blue screen.

Purchase Notice:

5. Only supports one gap M-key NVMe SSD, Don't support two gaps BM-key SATA SSD .