Your Browsing History
Ships from China.
Most customers receive within 4-17 days.
Meet Your Seller
JVFYI USB3.0 A/C to Gigabit SFP Fiber Ethernet Adapter (RTL8153B)
- The USB3.0 A/C to Gigabit SFP Network adapter used an controller RTL8153B, Which is features USB3.0 A/C to provide higher bandwidth and improved protocols for data exchange between the host and the device. USB3.0 A/C also offers more advanced power management features for energy saving. The RTL8153B supports IEEE802.3az-2010, also known as Energy Efficient Ethernet (EEE), and it is fully compliant with Microsoft NDIS5, NDIS6(IPv4, IPv6, TCP, UDP) checksum features, and supports IEEE802 IP layer 2 priority encoding and IEEE802.1Q Virtual bridged Local Area network(VLAN). It is suitable for desktop, workstation, server, communication platforms etc.
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Integrated 1000Mbps-SX/LX transceiver
Supports USB3.0, USB2.0 and USB1.1
Supports CDC-ECM
Supports LPM (Link Power Management)
Supports Pair swap/polarity/skew correction
Crossover Detection &Auto-Correction
Transmit/Receive on-chip buffer support
Supports hardware CRC (Cyclic Redundancy Check) function
Supports power down/link down power saving
Upstream port: USB3.0 A/C
Downstream port: SFP port
Chipset: Realtek RTL8153B
Package content
1 x USB3.0 A/C to Gigabit SFP Network Adapter
1 x Users Manual
1 x CD
Accessories
System Requirements
Linux, MAC OS10.6~10.13,Windows XP/Vista/Win7/Win8/Win8.1/Win10 32bit or 64 bit
Available USB3.0 A/C port
Hardware installation
1.Turn on the computer and get it into the system
2.Plug the USB3.0 adapter into your computers USB port
3.Insert the SFP optical fiber module into the SFP port
Install Drivers
Windows Operating Systems
For Windows XP/Vista/Win7/Win8/Win8.1/Win10
Only need plug the USB3.0 SFP adapter into your computers USB port, at the same time the computer system will recognize a new drive disk, Double-click the drive disk, and the system will start and finish the driver installation automatically(if the driver does not installed, please right-click open to Brower drive disk file, and double-click RTK_NIC_DRIVER_INSTALLER,sfx.exe). The drive disk will disappear after the driver is installed successfully.
*If the driver still installed failure, please follow below process to complete install:
1.Pls take out the CD from the package and place it in the computer CD drive.
2.Find the driver file corresponding to the system.
3.Double-click Setup.exe to start the program installation.
4.Follow the steps in the program until the last one, and restart the computer.
To Verify Windows® Driver Installation
Click on the Device Manager tab in System Properties, which you access from the Windows Control Panel. If you has installed successfully, you should see Realtek USB GbE Family Controllerinstalled under Network Adapter item.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by BRIGHTOR Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...