FindTape Security Printed Tape with Serrated Edges: 3/4 in. x 72 yds. (Red) - OEM

FindTape Security Printed Tape with Serrated Edges (SKU SPTSE) is a printed BOPP polypropylene film packaging tape with a saw-tooth serrated edge and a repeating "Tamper Resistant" legend. It seals the carton and carries the security message in a single pass, with no separate label or second tape to apply.

The serrated edge lets you tear a strip off the roll by hand without scissors or a dispenser, and it causes the film to fracture into ragged pieces if someone tries to lift the seal off in one piece. The acrylic adhesive bonds to corrugated, paperboard, film, and most rigid plastics, and resists aging and yellowing during long storage.

Used for retail packaging, software and electronics, pharmaceutical and medical packaging, jewelry, document envelopes, sample kits, and color coding sealed containers.

Currently stocked in 3/4 in. x 72 yds. in red. Additional widths are available by special order.

Important: this is a tamper resistant tape, not a tamper evident tape. It does not leave a hidden message behind on the container when removed. Service temperature range is 25 to 120 degrees Fahrenheit. Country of Origin: United States.

1. Make sure the surface is dry, clean, and free of dust, oil, and loose fibers.
2. Pull the desired length from the roll and tear it against the serrated edge.
3. Center the strip across the seam, flap, or lid so it bridges both sides of the closure.
4. Press firmly along the full length of the strip to wet out the adhesive.
5. Allow 24 to 48 hours for the acrylic adhesive to reach full bond strength before shipping or handling if maximum hold is needed.