Installation Notes for Adhesive Hooks 1.Choose proper position: Apply on smooth and flat walls, tiles, glass and wooden doors. Not recommended for rough walls, plaster walls, wallpaper or dusty walls, easy to fall off.
2.Clean the surface: Wipe off dust, oil stains and water stains, paste only when completely dry. 3.Position first then remove adhesive tape: Confirm the placement before peeling off the backing paper to avoid re-sticking and losing viscosity.
6.Avoid harsh environments: Do not install in areas with long-term water splashing, high temperature or direct strong sunlight. 7.Do not re-stick repeatedly: Secondary pasting reduces adhesion and firmness greatly.
4.Press firmly: Press fully after pasting, compact the edges and squeeze out all air. 5.Stand for curing: Hang items after 24 hours; early load bearing easily causes falling off.
8.Remove without damaging walls: Soften the glue with a hair dryer, take it off slowly with no residual glue left.
Installation Notes for Adhesive Hooks 1.Choose proper position: Apply on smooth and flat walls, tiles, glass and wooden doors. Not recommended for rough walls, plaster walls, wallpaper or dusty walls, easy to fall off.
2.Clean the surface: Wipe off dust, oil stains and water stains, paste only when completely dry. 3.Position first then remove adhesive tape: Confirm the placement before peeling off the backing paper to avoid re-sticking and losing viscosity.
6.Avoid harsh environments: Do not install in areas with long-term water splashing, high temperature or direct strong sunlight. 7.Do not re-stick repeatedly: Secondary pasting reduces adhesion and firmness greatly.
4.Press firmly: Press fully after pasting, compact the edges and squeeze out all air. 5.Stand for curing: Hang items after 24 hours; early load bearing easily causes falling off.
8.Remove without damaging walls: Soften the glue with a hair dryer, take it off slowly with no residual glue left.
