Pro'skit MT-7062 HDMI Cable Measuring Tester Test

Support HDMI versionHDMI Cables with type A & C connectors conforming to 1.0, 1.1, 1.2, 1.3, 1.3a, 1.3b, 1.3c, 1.4, 1.4a, catagory 1 and catagory 2 cablesMeasurement instructions(Host and remote)19 LEDs foot pin docking test instructions and directions 1LED shieldHost can test the connection FuHDMI (type A) 2,Mini HDMI (type C) 1The distal end can test the connection FuHDMI (type A) 1,Mini HDMI (type C) 1Test functionFast scan / Slow scan / Step by stepAudible indicationHaveBattery low voltage indication (V)6.0VPower supplyDC 9V 1 (not included)EnvironmentOperating environment: 0C to 40C (32F to 104F) <80% RHStorage Environment: -10C to 50C (14F to 122F) <70% RHSizeHost 103 66 27mmThe distal end 103 35 27mm MT-7062 HDMI cable tester provides fast, accurate confirmation of HDMI and MINIHDMI cable connection status, detection wire conduction and display the hostand the distal 19 pins and shield connection status.HDMI and MINI HDMI testTest HDMI/MINI HDMI cable type A all the A, A of C and C on the C connector,especially for the weak, easy to damage the HDMI jumper and test before and after installation in the walls of the HDMI cable connection quality.In circuit test (loopback) functionThe host has a loop test (loopback) function, you can test the HDMI A on A andHDMI A on C.3 test modesAutomatic fast scan all wire state test, automatic slow scan in cable and manualstep by step individual wire fault detection.TroubleshootingFast verification of HDTV installation and troubleshooting of DIY terminal status.