- Free 30-day Returns
Meet Your Seller
Alphacool Eiszapfen Filter G1/4 Inner Thread - Plexi (29121)
- Alphacools Eiszapfen series is forward-looking and distinguishes itself through its exceptional design and high flow rate
- The Alphacool Eiszapfen POM plexi filter is ideal for water cooling systems with microstructure coolers
- The filter prevents the microstructure coolers from becoming clogged, since these coolers are often difficult to clean manually due to their small size
- This makes the filter ideal for high-flow systems
- In the box: 1x Alphacool Eiszapfen Filter G1/4 Inner Thread - Plexi
Any questions? Ask CelesteSM will help you find out quickly.
The Alphacool Eiszapfen Filter G1/4 Inner Thread - Plexi is an inline filter for a water cooling loop with a G1/4 inner thread on each end, one filter per pack. The clear body is acrylic and measures 20 x 25 mm.
Properties
- Thread: 2x G1/4 inner thread
- Size (L x D): 20 x 25 mm
- Material: Acrylic (plexi)
- Filter: Stainless steel fiber microfilter
- Pieces in the pack: 1
What it protects
Alphacool calls this filter ideal for water cooling systems with microstructure coolers. It prevents those coolers from becoming clogged, which matters since these coolers are often difficult to clean manually due to their small size.
Flow rate
Alphacool's Eiszapfen series is, in its maker's words, forward-looking, and distinguishes itself through its exceptional design and high flow rate. The filter is constructed so that resistance through the mesh, the filter screen, is minimal. Alphacool goes further and says there is no resistance, the opposite, in fact. It puts the flow rate of the filter around 50% higher than a tube with an 8 mm inner diameter, and around 30% higher than a tube with a 10 mm inner diameter. This makes it Alphacool's choice for high-flow systems. Once the filter is more than 30% to 50% clogged, depending on the inner tube diameter, a reduction in flow rate does kick in, and only then.
What the loop needs
Both ends are G1/4 inner threads, so the filter takes two fittings with a G1/4 outer thread, one on each side. Alphacool makes it in three colors: chrome, deep black and acrylic.
Technical specifications
- Dimensions (LxD): 20 x 25 mm
- Material: acrylic
- Filter: stainless steel fiber microfilter
- Flow rate reduction only after very clogged: 30% to 50%
- Connector thread: 2x G1/4 inch
Notes
- Use only clear, transparent water cooling fluids. Alphacool warns that the particles and additives in pastel liquids can clog and permanently damage radiators, pumps, coolers and hoses, which can void the manufacturer's warranty.
In the box
- 1x Alphacool Eiszapfen filter G1/4 inner thread - Acrylic
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory








