550GPH Submersible Pump 30W Fountain Water Pump, 2000L/H, with 7.2ft High Lift, 3 Nozzles for Aquarium, Fish Tank, Pond, Hydroponics, Statuary, Pool

WATER FLOW CONTROL -- The GROWNEER water pump features a control knob to adjust the flow of water, allowing you to achieve the desired water pressure. The maximum flow rate is 550 GPH (2000 L/H). Note: It's recommended to use a residual current protection socket or circuit breaker when using outdoors
STRONG POWER & HIGH LIFT -- Maximum Lift Height: 7.2 ft. The water submersible pump model number is SML-630. 30W high-efficiency motor, energy-saving. Lift height refers to the maximum height that water rises after the water pipe is connected to the nozzle. (Make sure the joint is tightly sealed)
3 NOZZLES WATER PUMP -- Each submersible water pump has 3 nozzles to choose from: 0.51"/0.62"/0.75". Provides different water flows according to your needs. Threaded fittings make it more stable. Detachable and cleanable
SUCTION CUP & 5.9FT POWER CORD -- The aquarium pump has a long enough cord for easy installation. 4 independent powerful suction cups help keep it in place so you can stick it vertically or horizontally to the right side of your aquarium
WIDE APPLICATION -- The water fountain pump circulates and aerates the water, making it more attractive to your fish or turtles. This submersible pump is ideal for aquariums, fountains, spouts hydroponic systems, etc

Growneer began as a gardening tools retailer but evolved into a brand with a mission: to make gardening a force for good. Through safety products, innovative design, and sustainable practices, we empower gardeners to nurture both their plants and the planet. At Growneer, we’re turning gardening into a movement that enriches lives and inspires a brighter tomorrow.
WATER GARDEN
PLANT SUPPORTS
SEED STARTER

GROWNEER 550GPH Submersible Pump

Merchant Video

CLEANING WARNING: 1. Ensure water is free of sand, gravel, or salt. 2. Clean regularly to prevent debris blockage and noise. 3. If the pump stops working, the flow rate decreases or the noise increases, please stop using it immediately. After disassembly, clean the internal dirt before resuming use.

NOTE:
1. Use only cold water and avoid liquids above 86?.
2. If the temperature is below 32?, immediately remove the pump from the water and drain any accumulated water to prevent freezing damage.

SAFETY TIPS: 1. Don't operate without water. 2. Turn off the power when changing water. 3. Immerse the pump in water before connecting power. 4. If the pump will not be used for a long time, remove it from the water, run it in clean water briefly then clean and dry the parts.