Upgraded Smart Automatic Dehumidifier Pump 15FT High Lift Vertical Drain Over 100FT Horizontal IPX8 Fully Submersible Mini Drain Pump Auto Water Level Detection Fit for Basement Laundry Room

15FT Powerful Vertical Lift & Long Distance Auto DrainageSay goodbye to daily tank emptying! This upgraded dehumidifier pump pushes water vertically up to 15FT (4.5m) and horizontally over 100FT (30m). Built-in smart water level sensor auto-checks water hourly, auto-starts draining when tank fills and switches to energy-saving standby after full drainage. Keep your dehumidifier running nonstop for basements, crawl spaces, laundry rooms without nearby floor drains. Comes with a 13ft, 0.315in diameter drain hose
IPX8 Fully Sealed Waterproof for Long Submersion SafetyAdopts full enclosed IPX8 waterproof housing, safe for permanent full submersion inside dehumidifier water tanks without leakage risk. Pure copper 6000 RPM motor delivers stable pumping power with long service life, resistant to constant high-humidity tank environments. No water seepage or short circuit hazards, ideal for year-round continuous drainage use in damp basement spaces.
Ultra Quiet Vibration Reduction with Suction Cup Base4 bottom suction cups lock the mini pump tightly to the tank floor, eliminating wall collision vibration and extra running noise. Optimized silent motor design runs softlyyou will barely hear the pump even beside bedroom or living room dehumidifiers. No buzzing, rattling or disruptive sounds during day & night operation.

Can this dehumidifier pump drain water uphill?
Yes. This pump supports up to 15FT vertical lift and over 100FT horizontal drainage, making it ideal for basements, laundry rooms, crawl spaces, and areas without a nearby floor drain.
Will this fit inside my dehumidifier tank?
The compact mini design fits most medium and large-capacity portable dehumidifier tanks commonly used in U.S. homes.
Does the pump stop automatically when the tank is empty?
Yes. Once the water is drained, the system automatically switches back to standby mode to reduce unnecessary power usage.
Why doesn’t the pump restart immediately after sitting idle for a long time?
The pump enters standby mode after long inactivity and checks water levels periodically. If it doesn’t restart, unplug the power for about 3 minutes, then reconnect to reset the system.
Why is there a delay before the pump starts again?
After long inactive periods, the pump switches to standby monitoring mode instead of continuous detection.
For best performance, wait about 3 minutes after unplugging before reconnecting the power.

The Pump Technology Expert
Many homes still struggle with overflowing dehumidifier tanks, especially in basements. Manual draining is inconvenient and time-consuming. That’s why we created the Automatic Dehumidifier Pump. With a 4.5m lift, smart water-level detection, and a compact design that fits most tanks, it helps keep spaces dry with less effort. From basements to storage rooms, our goal is simple: smarter drainage, cleaner homes, and more time for what matters.

The Pump Technology Expert
Many homes still struggle with overflowing dehumidifier tanks, especially in basements. Manual draining is inconvenient and time-consuming. That’s why we created the Automatic Dehumidifier Pump. With a 4.5m lift, smart water-level detection, and a compact design that fits most tanks, it helps keep spaces dry with less effort. From basements to storage rooms, our goal is simple: smarter drainage, cleaner homes, and more time for what matters.

Can this dehumidifier pump drain water uphill?
Yes. This pump supports up to 15FT vertical lift and over 100FT horizontal drainage, making it ideal for basements, laundry rooms, crawl spaces, and areas without a nearby floor drain.
Will this fit inside my dehumidifier tank?
The compact mini design fits most medium and large-capacity portable dehumidifier tanks commonly used in U.S. homes.
Does the pump stop automatically when the tank is empty?
Yes. Once the water is drained, the system automatically switches back to standby mode to reduce unnecessary power usage.
Why doesn’t the pump restart immediately after sitting idle for a long time?
The pump enters standby mode after long inactivity and checks water levels periodically. If it doesn’t restart, unplug the power for about 3 minutes, then reconnect to reset the system.
Why is there a delay before the pump starts again?
After long inactive periods, the pump switches to standby monitoring mode instead of continuous detection.
For best performance, wait about 3 minutes after unplugging before reconnecting the power.

Meet Your Seller