Epoxy Concrete Crack Repair Kit (10 ft) Low-Viscosity Epoxy Injection for Basement & Foundation Walls Structural Crack Repair System

Structural Epoxy Crack Repair System A high-strength epoxy injection solution for mending cracks in poured concrete walls, such as those found in basements, foundations, crawlspaces, and retaining walls. ASTM C881 Compliant Professional Epoxy A two-part structural epoxy designed for concrete crack repair in both residential and commercial foundation uses. Low-Viscosity Deep Penetration Flows into both narrow and wide cracks, filling them completely and curing to form a rigid, high-strength bond that restores structural integrity. Complete DIY Injection Kit Contains all components needed for epoxy crack injection with a standard caulking gun. Engineered for simple installation with no special tools needed. Repairs Up to 10 Linear Feet of Cracks Intended for vertical and diagonal cracks in poured concrete walls. Coverage may vary depending on crack width and depth. Approximately 10 ft based on a 1/16" wide crack in a 10" thick wall. Interior & Exterior Use Appropriate for application from either side of the wall, above or below grade, based on access and project needs. For Dry or Damp Cracks Can be applied to dry or damp concrete (no standing water), making it appropriate for typical basement and foundation repair conditions